Hi Petr, Thanks for your feedback.
On Wed, May 15, 2019 at 12:17 PM Petr Štetiar <yn...@true.cz> wrote: > > In order to install OpenWRT, you first need to compile an initramfs > > (ramdisk)-image for the device. > > This is no longer valid, right? Correct, will remove it for v4. > > > --- a/target/linux/ramips/base-files/etc/board.d/01_leds > > +++ b/target/linux/ramips/base-files/etc/board.d/01_leds > > @@ -184,6 +184,9 @@ hc5861) > > ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" > > "wlan0" > > ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" > > "wlan1" > > ;; > > +head-weblink,hdrm200) > > + set_wifi_led "$boardname:green:wifi" > > + ;; > > this could be grouped with other devices. Thanks for spotting this. > so if I'm counting it right, you should probably remove i2c. If I have understood the datasheet correctly, then i2c is required for two of the GPIOs exported in 03_gpio_switches (io1/GPIO#1 and io2/GPIO#2). BR, Kristian _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel