On Sun, May 26, 2019 at 11:46 PM Hauke Mehrtens <[email protected]> wrote: > On 5/24/19 11:09 PM, Linus Walleij wrote: > > Hi Hauke, > > > > this patch regresses my Gemini systems because I really need these switches > > to come up and this patch: > > Sorry Linus, > > I didn't know that they are needed, I assumed that they were > accidentally added for the gemini target, on the ath79 target these > options were not defined by the build system for kernel 4.19 at all.
Don't worry I find all the bugs :) For ath79 CONFIG_NET_DSA_VITESSE_VSC73XX it is however pretty relevant I think! The AR71xx v4.14 kernel at ar71xx/files/drivers/spi/spi-vsc7385.c there is some OpenWrt custom driver for the VSC7385 that is used by the PB44 board and added in patch: patches-4.14/606-MIPS-ath79-pb44-fixes.patch this should be covered by the new upstream driver in v4.19, but I don't have this router so I cannot really enable it. I think it will be possible to just enable the driver for use without any of the special firmware that is provided for PB44 in the OpenWrt tree. The best would be if PB44 would be converted to device tree to use it, but I suppose it is also possible to patch drivers/net/dsa/vitesse-vsc73xx.c to use the boardfile. > Are both switches found on some of the gemini board? I will add them again. Yep the RTL8366RB is on the DIR-685 and the Vitesse variants are on the SQ201. Yours, Linus Walleij _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
