Here are recent release notes:

wave-1:

  *  May 9, 2019:  Tweak rate-ctrl:  Ramp PER up faster, down slower.  This 
helps throughput
                   in rate-vs-range test, especially with nss1.

  *  May 20, 2019:  Disable adaptive-CCA.  I am not sure it helps, and it may 
make it slower
                    to detect noise that should tell the system to stop 
transmitting.  If someone
                    has means to test this properly, I'd be happy to work with 
them.

wave-2:

  *  May 15, 2019  Fix problem where rate-ctrl sometimes used rix of 0x0.

  *  May 15, 2019  Allow raw-tx of encrypted frame.  Requires a patch to the 
driver to use
                   raw mode when skb has WEP flag enabled AND skb is flagged to 
not be
                   encrypted.  Lightly tested.

  *  May 16, 2019  Fix tx-hang that happened when rate-ctrl chose an OFDM rate 
for 20Mhz
                   and sent that as AMPDU.  To fix, limit to (V)HT rates if 
peer is (V)HT.
                   It seems that MCS0 (V)HT20 should have as good of a chance 
of being
                   detected as CCK or OFDM.

  *  June 6, 2019  Disable TX-BFEE, TX-BFER for IBSS connections.  I suspect 
this is part of the tx-hang
                   issue seen with IBSS between two 9984 radios.

  *  June 12, 2019  Fix rx-rate reporting in 'fw_stats' logic.  This was at 
least partly due to regressions
                    I had added earlier when working on some multi-vdev 
enhancements.

  *  June 12, 2019  Fix case where extd peer-stats were not always populated.  
The stats gathering
                    code did not handle error conditions well.


Driver changes include:
* Fixing mfp/pmf for management frames (in htt-mgt mode)
* Sven's txpower related fixes
* raw tx of encrypted frames works (on wave 2, at least)


Here are the new locations and checksums for the firmware images.

988x
d4ba8b386be0eda7e1e0ea1653e40a9776c9a5eeb4e7fef656466da30628b17b  
firmware-2-ct-full-community-22.bin.lede.009
12155e9599194c8274d6a96c603f00723b5f036fe8e4c1518ee64cac529a9b34  
firmware-2-ct-full-htt-mgt-community-22.bin.lede.009
/home/greearb/candela_html/downloads
9887
9e1a2b30fc9f680ab1a42335b0091953fa600573a7376b2d67f1b4032f518644  
firmware-2-ct-full-community-22.bin.lede.009
a19ea4bad001c1781d064114322502d5a612fb917e02480f971412e090d7f452  
firmware-2-ct-full-htt-mgt-community-22.bin.lede.009
/home/greearb/candela_html/downloads
9980
5ad3315297ce3a9cce8706b79eae7783d269b76a56063685100c7e8cd3ff47e5  
firmware-5-ct-full-community-12.bin-lede.009
52c5eebde1ef130273353630e7e91e4dfb638a7e9a3a74aaef44cdccb5ce5412  
firmware-5-ct-full-htt-mgt-community-12.bin-lede.009
/home/greearb/candela_html/downloads
9984
c54a53821d9b4fb36e69adb53277ad16e126afa692e5e488121c53cc39c7c4ba  
firmware-5-ct-full-community-12.bin-lede.009
7613d3387dc2d83759759bb14e25312c33f3984a11cd59e66ab2b0470f32abb6  
firmware-5-ct-full-htt-mgt-community-12.bin-lede.009
/home/greearb/candela_html/downloads
4019
cec771a2f5f911a77b1f254a113de67cc68edc5d02dc06c7fddbccb448340b55  
firmware-5-ct-full-community-12.bin-lede.009
aff872b4e6f4f7eb000518d3ff4056565a076b81a9dd3ce8f382ceeab7f069c3  
firmware-5-ct-full-htt-mgt-community-12.bin-lede.009
/home/greearb/candela_html/downloads
9888
c307c9cd44f650be9504b44786245381b0b88a4348fce85c76a6993fdc8e9e13  
firmware-5-ct-full-community-12.bin-lede.009
1a419f99d8283042434ed2de86e8aba85b9941ff3c75ab0805d71f4c108e272f  
firmware-5-ct-full-htt-mgt-community-12.bin-lede.009
/home/greearb/candela_html/downloads


ath10k-ct HEAD:
commit a045b1ce61fe0908468c019e17a3848f7842c927 (HEAD -> master, origin/master)
Author: Ben Greear <gree...@candelatech.com>
Date:   Thu Jun 13 08:45:12 2019 -0700

    ath10k:  Improve PMF/MPF mgt frame check

    And add a driver for 5.2 (beta, not even tested yet) kernel.


Thanks,
Ben

--
Ben Greear <gree...@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com

_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Reply via email to