This fixes one comparison and several useless echos.
Signed-off-by: Adrian Schmutzler <[email protected]>
---
.../base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git
a/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
b/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index 2da2e8bfb0..bdb8b71ff7 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -1,6 +1,6 @@
#!/bin/ash
-[ "$ACTION" == "add" ] || exit 0
+[ "$ACTION" = "add" ] || exit 0
PHYNBR=${DEVPATH##*/phy}
@@ -17,18 +17,18 @@ case "$board" in
# There is no eeprom data for 5 GHz wlan in "art" partition
# which would allow to patch the macaddress
[ "$PHYNBR" -eq 1 ] && \
- echo $(macaddr_add "$(mtd_get_mac_ascii u-boot-env
ethaddr)" 1) > /sys${DEVPATH}/macaddress
+ macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1
> /sys${DEVPATH}/macaddress
;;
iodata,wn-ac1600dgr)
# There is no eeprom data for 5 GHz wlan in "art" partition
# which would allow to patch the macaddress
[ "$PHYNBR" -eq 0 ] && \
- echo $(macaddr_add "$(mtd_get_mac_ascii u-boot-env
ethaddr)" 1) > /sys${DEVPATH}/macaddress
+ macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1
> /sys${DEVPATH}/macaddress
;;
phicomm,k2t)
# The K2T factory firmware does use LAN mac address as the 2.4G
wifi mac address
[ "$PHYNBR" -eq 1 ] && \
- echo $(k2t_get_mac "lan_mac") >
/sys${DEVPATH}/macaddress
+ k2t_get_mac "lan_mac" > /sys${DEVPATH}/macaddress
;;
*)
;;
--
2.20.1
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
