Am Mittwoch, 26. Juni 2019, 12:02:23 CEST schrieb Luochongjun: > This patch supports gl-ar750, which was previously supported by ar71xx. > > Specification: > - SOC: QCA9531 (650MHz) > - Flash: 16 MiB (W25Q128FVSG) > - RAM: 128 MiB DDR2 > - Ethernet: 10/100: 2xLAN + 10/100: 1xWAN > - Wireless: 2.4GHz (bgn) and 5GHz (ac) > - USB: 1x USB 2.0 port > - Switch: 1x switch > - Button: 1x reset button > - LED: 3x LEDS (white) > > Flash instruction: > Support for sysupgrade directive upgrades, as well as luci upgrades. >
Thanks for porting this device. Based on your previous patch I built an image and flashed it. Two thing to mention: * probalby you can add a line "SUPPORTED_DEVICES += gl-ar750" to the Makefile, to make sysupgrade accept the image without "-F" switch on ar71xx * the device has "printed MAC-address from case" + 1 for the LAN-ports. Not sure what is used with vendor FW. Sven _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel