Hi Daniel, > -----Original Message----- > From: openwrt-devel [mailto:[email protected]] > On Behalf Of Daniel Danzberger > Sent: Dienstag, 16. Juli 2019 12:31 > To: [email protected] > Cc: Daniel Danzberger <[email protected]> > Subject: [OpenWrt-Devel] [PATCH] ramips: mt7621: Add new device AsiaRF > AP7621-NV1 > > SoC: Mediatek MT7621A > CPU: 4x 880Mhz > Cache: 32 KB I-Cache and 32 KB D-Cach > 256 KB L2 Cache (shared by Dual-Core) > RAM: DDR3 512MB 16bits BUS > FLASH: 16MB > Switch: Mediatek Gigabit Switch (2 x LAN, 1 x WAN) > POE: (1x PD, 2x PSE) > USB: 1x 3.0 > PCI: 3x Mini PCIe (3 USB2.0 + 2 x UIM interface) > GPS: Quectel L70B > SIM: 2 Slots > BTN: Reset > LED: - Power > - Ethernet > - Wifi > - USB > UART: UART is present as Pads with throughholes on the PCB. > They are located on left side. > 3.3V - RX - GND - TX / 57600-8N1 > 3.3V is the square pad > > Installation > ------------ > The stock image is a modified openwrt and can be overflashed via > sysupgrade -F > > Signed-off-by: Daniel Danzberger <[email protected]> > --- > target/linux/ramips/base-files/etc/board.d/02_network | 3 +++ > target/linux/ramips/dts/mt7621_asiarf_ap7621-nv1.dts | 9 +++++++++ > target/linux/ramips/image/mt7621.mk | 10 ++++++++++ > 3 files changed, 22 insertions(+) > create mode 100644 target/linux/ramips/dts/mt7621_asiarf_ap7621-nv1.dts > > diff --git a/target/linux/ramips/base-files/etc/board.d/02_network > b/target/linux/ramips/base-files/etc/board.d/02_network > index c3b7cd4390..c348b91a36 100755 > --- a/target/linux/ramips/base-files/etc/board.d/02_network > +++ b/target/linux/ramips/base-files/etc/board.d/02_network > @@ -228,6 +228,9 @@ ramips_setup_interfaces() > asiarf,ap7621-001) > ucidef_add_switch "switch0" "0:lan" "4:wan" "6@eth0" > ;; > + asiarf,ap7621-nv1) > + ucidef_add_switch "switch0" "0:wan" "2:lan" "3:lan" > "6@eth0" > + ;; > asiarf,awapn2403) > ucidef_add_switch "switch0" \ > "0:lan" "1:wan" "6@eth0" > diff --git a/target/linux/ramips/dts/mt7621_asiarf_ap7621-nv1.dts > b/target/linux/ramips/dts/mt7621_asiarf_ap7621-nv1.dts > new file mode 100644 > index 0000000000..93af3950d2 > --- /dev/null > +++ b/target/linux/ramips/dts/mt7621_asiarf_ap7621-nv1.dts > @@ -0,0 +1,9 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT > + > +/dts-v1/; > +#include "mt7621_asiarf_ap7621-001.dts"
Please create a DTSI, e.g. mt7621_asiarf_ap7621.dtsi, for the includes.
> +
> +/ {
> + compatible = "asiarf,ap7621-nv1", "mediatek,mt7621-soc";
> + model = "AsiaRF AP7621-NV1";
> +};
> diff --git a/target/linux/ramips/image/mt7621.mk
> b/target/linux/ramips/image/mt7621.mk
> index e2928c80ce..1eb1a4cb99 100644
> --- a/target/linux/ramips/image/mt7621.mk
> +++ b/target/linux/ramips/image/mt7621.mk
> @@ -106,6 +106,16 @@ define Device/asiarf_ap7621-001 endef
> TARGET_DEVICES += asiarf_ap7621-001
>
> +define Device/asiarf_ap7621-nv1
> + MTK_SOC := mt7621
> + IMAGE_SIZE := $(ralink_default_fw_size_16M)
Please use the precise size of the firmware partition, I think it would be
16000k.
Best
Adrian Schmutzler
> + DEVICE_VENDOR := AsiaRF
> + DEVICE_MODEL := AP7621-NV1
> + DEVICE_PACKAGES := \
> + kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 endef
> TARGET_DEVICES +=
> +asiarf_ap7621-nv1
> +
> define Device/asus_rt-ac57u
> MTK_SOC := mt7621
> DEVICE_VENDOR := ASUS
> --
> 2.20.1
>
>
> _______________________________________________
> openwrt-devel mailing list
> [email protected]
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
openpgp-digital-signature.asc
Description: PGP signature
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
