Hi, > -----Original Message----- > From: Rosen Penev [mailto:[email protected]] > Sent: Mittwoch, 24. Juli 2019 18:54 > To: Adrian Schmutzler <[email protected]> > Cc: OpenWrt Development List <[email protected]> > Subject: Re: [OpenWrt-Devel] [PATCH] mvebu: Replace backticks by $(...) > > On Wed, Jul 24, 2019 at 6:34 AM Adrian Schmutzler > <[email protected]> wrote: > > > > Signed-off-by: Adrian Schmutzler <[email protected]> > > --- > > target/linux/mvebu/base-files/lib/upgrade/linksys.sh | 2 +- > > target/linux/mvebu/base-files/sbin/fan_ctrl.sh | 6 +++--- > > 2 files changed, 4 insertions(+), 4 deletions(-) > > > > diff --git a/target/linux/mvebu/base-files/lib/upgrade/linksys.sh > b/target/linux/mvebu/base-files/lib/upgrade/linksys.sh > > index 3f45d6cac5..ddf24836bc 100644 > > --- a/target/linux/mvebu/base-files/lib/upgrade/linksys.sh > > +++ b/target/linux/mvebu/base-files/lib/upgrade/linksys.sh > > @@ -6,7 +6,7 @@ linksys_get_target_firmware() { > > > > local cur_boot_part mtd_ubi0 > > > > - cur_boot_part=`/usr/sbin/fw_printenv -n boot_part` > > + cur_boot_part=$(/usr/sbin/fw_printenv -n boot_part) > > if [ -z "${cur_boot_part}" ] ; then > > mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num) > > case $(egrep ^mtd${mtd_ubi0}: /proc/mtd | cut -d '"' -f 2) > > in > egrep is deprecated as well. I'm assuming you're running these through > shellcheck.
I indeed got this hint from shellcheck, suggesting "grep -E" as replacement. However, I'm not familiar with the old egrep. So, I was not sure whether I really can replace it without side-effects, and since I cannot test on this target, I decided against changing that. If you tell me it's okay, I can include it in a v2. Best Adrian > > diff --git a/target/linux/mvebu/base-files/sbin/fan_ctrl.sh > b/target/linux/mvebu/base-files/sbin/fan_ctrl.sh > > index 06e462119d..4234668317 100755 > > --- a/target/linux/mvebu/base-files/sbin/fan_ctrl.sh > > +++ b/target/linux/mvebu/base-files/sbin/fan_ctrl.sh > > @@ -1,8 +1,8 @@ > > #!/bin/sh > > > > -CPU_TEMP=`cut -c1-2 /sys/class/hwmon/hwmon2/temp1_input` > > -DDR_TEMP=`cut -c1-2 /sys/class/hwmon/hwmon1/temp1_input` > > -WIFI_TEMP=`cut -c1-2 /sys/class/hwmon/hwmon1/temp2_input` > > +CPU_TEMP=$(cut -c1-2 /sys/class/hwmon/hwmon2/temp1_input) > > +DDR_TEMP=$(cut -c1-2 /sys/class/hwmon/hwmon1/temp1_input) > > +WIFI_TEMP=$(cut -c1-2 /sys/class/hwmon/hwmon1/temp2_input) > > > > CPU_LOW=85 > > CPU_HIGH=95 > > -- > > 2.20.1 > > > > > > _______________________________________________ > > openwrt-devel mailing list > > [email protected] > > https://lists.openwrt.org/mailman/listinfo/openwrt-devel
pgpyWOW7t1mCq.pgp
Description: PGP signature
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
