This changes size and offset set for WiFi caldata extraction and MAC address adjustment to hexadecimal notation.
This will be much clearer for the reader when numbers are big, and will also match the style used for mtd-cal-data in DTS files. Since dd cannot deal with hexadecimal notation, one has to convert back to decimal by simple $(($hexnum)). Acked-by: Alexander Couzens <[email protected]> Signed-off-by: Adrian Schmutzler <[email protected]> --- Changes in v2/v3: - Rebase --- .../etc/hotplug.d/firmware/10-ath9k-eeprom | 22 +++--- .../etc/hotplug.d/firmware/10-ath9k-eeprom | 46 ++++++------ .../etc/hotplug.d/firmware/11-ath10k-caldata | 56 +++++++------- .../etc/hotplug.d/firmware/10-ath9k-eeprom | 74 +++++++++---------- .../etc/hotplug.d/firmware/11-ath10k-caldata | 56 +++++++------- .../etc/hotplug.d/firmware/10-rt2x00-eeprom | 8 +- .../etc/hotplug.d/firmware/11-ath10k-caldata | 58 +++++++-------- .../etc/hotplug.d/firmware/11-ath10k-caldata | 36 ++++----- .../etc/hotplug.d/firmware/12-ath9k-eeprom | 34 ++++----- .../etc/hotplug.d/firmware/10-ath9k-eeprom | 8 +- .../etc/hotplug.d/firmware/10-rt2x00-eeprom | 6 +- 11 files changed, 202 insertions(+), 202 deletions(-) diff --git a/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index b3b8886720..272c084c99 100644 --- a/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/apm821xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -12,8 +12,8 @@ ath9k_eeprom_die() { ath9k_eeprom_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd mtd=$(find_mtd_chardev $part) @@ -26,8 +26,8 @@ ath9k_eeprom_extract() { ath9k_ubi_eeprom_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local ubidev=$(nand_find_ubi $CI_UBIPART) local ubi @@ -40,11 +40,11 @@ ath9k_ubi_eeprom_extract() { } ath9k_patch_firmware_mac() { - local mac=$1 + local mac=$1 - [ -z "$mac" ] && return + [ -z "$mac" ] && return - macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=2 count=6 + macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=2 count=6 } board=$(board_name) @@ -56,9 +56,9 @@ case "$FIRMWARE" in . /lib/upgrade/nand.sh if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 20480 4096 + ath9k_ubi_eeprom_extract "caldata" 0x5000 0x1000 else - ath9k_eeprom_extract "wifi_data" 20480 4096 + ath9k_eeprom_extract "wifi_data" 0x5000 0x1000 ath9k_patch_firmware_mac $(mtd_get_mac_binary wifi_data 0xc) fi ;; @@ -74,9 +74,9 @@ case "$FIRMWARE" in . /lib/upgrade/nand.sh if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 4096 4096 + ath9k_ubi_eeprom_extract "caldata" 0x1000 0x1000 else - ath9k_eeprom_extract "wifi_data" 4096 4096 + ath9k_eeprom_extract "wifi_data" 0x1000 0x1000 ath9k_patch_firmware_mac $(mtd_get_mac_binary wifi_data 0x0) fi ;; diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 3924202d8e..8fe57c87cc 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -12,8 +12,8 @@ ath9k_eeprom_die() { ath9k_eeprom_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd mtd=$(find_mtd_chardev $part) @@ -26,8 +26,8 @@ ath9k_eeprom_extract() { ath9k_ubi_eeprom_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local ubidev=$(nand_find_ubi $CI_UBIPART) local ubi @@ -42,7 +42,7 @@ ath9k_ubi_eeprom_extract() { ath9k_eeprom_extract_reverse() { local part=$1 local offset=$2 - local count=$3 + local count=$(($3)) local mtd local reversed local caldata @@ -72,43 +72,43 @@ case "$FIRMWARE" in case $board in c-55|\ c-60) - ath9k_eeprom_extract "art" 4096 2048 + ath9k_eeprom_extract "art" 0x1000 0x800 ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1) ;; fritz4020|\ fritz450e) - ath9k_eeprom_extract_reverse "urlader" 5441 1088 + ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440 ;; mr18) . /lib/upgrade/nand.sh if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 4096 2048 + ath9k_ubi_eeprom_extract "caldata" 0x1000 0x800 else - ath9k_eeprom_extract "odm-caldata" 4096 2048 + ath9k_eeprom_extract "odm-caldata" 0x1000 0x800 fi ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +1) ;; r6100 | \ wndr3700v4 | \ wndr4300) - ath9k_eeprom_extract "caldata" 4096 2048 + ath9k_eeprom_extract "caldata" 0x1000 0x800 ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0x0) ;; rambutan) - ath9k_eeprom_extract "art" 4096 2048 + ath9k_eeprom_extract "art" 0x1000 0x800 ;; wlr8100) - ath9k_eeprom_extract "art" 4096 2048 + ath9k_eeprom_extract "art" 0x1000 0x800 ath9k_patch_firmware_mac $(mtd_get_mac_ascii u-boot-env "ethaddr") ;; z1) . /lib/upgrade/nand.sh if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 4096 2048 + ath9k_ubi_eeprom_extract "caldata" 0x1000 0x800 else - ath9k_eeprom_extract "origcaldata" 4096 2048 + ath9k_eeprom_extract "origcaldata" 0x1000 0x800 fi ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +2) ;; @@ -121,34 +121,34 @@ case "$FIRMWARE" in "pci_wmac0.eeprom") case $board in c-55) - ath9k_eeprom_extract "art" 20480 2048 + ath9k_eeprom_extract "art" 0x5000 0x800 ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2) ;; fritz300e) - ath9k_eeprom_extract_reverse "urloader" 5441 1088 + ath9k_eeprom_extract_reverse "urloader" 0x1541 0x440 ;; mr18) . /lib/upgrade/nand.sh if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 20480 2048 + ath9k_ubi_eeprom_extract "caldata" 0x5000 0x800 else - ath9k_eeprom_extract "odm-caldata" 20480 2048 + ath9k_eeprom_extract "odm-caldata" 0x5000 0x800 fi ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +2) ;; wndr3700v4 | \ wndr4300) - ath9k_eeprom_extract "caldata" 20480 2048 + ath9k_eeprom_extract "caldata" 0x5000 0x800 ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0xc) ;; z1) . /lib/upgrade/nand.sh if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 86016 4096 + ath9k_ubi_eeprom_extract "caldata" 0x15000 0x1000 else - ath9k_eeprom_extract "origcaldata" 86016 4096 + ath9k_eeprom_extract "origcaldata" 0x15000 0x1000 fi ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +3) ;; @@ -164,9 +164,9 @@ case "$FIRMWARE" in . /lib/upgrade/nand.sh if [ -n "$(nand_find_volume ubi0 caldata)" ]; then - ath9k_ubi_eeprom_extract "caldata" 36864 2048 + ath9k_ubi_eeprom_extract "caldata" 0x9000 0x800 else - ath9k_eeprom_extract "odm-caldata" 36864 2048 + ath9k_eeprom_extract "odm-caldata" 0x9000 0x800 fi ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +3) ;; diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index a3d4770b32..2ba8de4783 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -7,8 +7,8 @@ ath10kcal_die() { ath10kcal_from_file() { local source=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ ath10kcal_die "failed to extract calibration data from $source" @@ -16,8 +16,8 @@ ath10kcal_from_file() { ath10kcal_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd cal_size mtd=$(find_mtd_chardev $part) @@ -57,17 +57,17 @@ case "$FIRMWARE" in mr1750|\ mr1750v2|\ om5p-acv2) - ath10kcal_extract "ART" 20480 2116 + ath10kcal_extract "ART" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) ;; archer-c25-v1|\ tl-wdr6500-v2) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2) ;; archer-c7-v4|\ archer-c7-v5) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1) ;; cf-e355ac-v1|\ @@ -81,60 +81,60 @@ case "$FIRMWARE" in oolite-v5.2-dev|\ sr3200|\ xd3200) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ;; dap-2695-a1) - ath10kcal_extract "radiocfg" 20480 2116 + ath10kcal_extract "radiocfg" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a) ;; dir-869-a1|\ qihoo-c301) - ath10kcal_extract "radiocfg" 20480 2116 + ath10kcal_extract "radiocfg" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_ascii devdata wlan5mac) ;; dw33d) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_binary art 0x12) ;; epg5000|\ esr1750) - ath10kcal_extract "caldata" 20480 2116 + ath10kcal_extract "caldata" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) ;; gl-ar750s|\ gl-ar750|\ tl-wpa8630) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) ;; koala) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0xc) +0) ;; mc-mac1200r) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1) ;; r6100) - ath10kcal_extract "caldata" 20480 2116 + ath10kcal_extract "caldata" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) +2) ;; rb-952ui-5ac2nd|\ rb-wapg-5hact2hnd) - ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 20480 2116 + ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 0x5000 0x844 ;; re355|\ re450|\ tl-wr902ac-v1) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2) ;; unifiac-lite|\ unifiac-pro) - ath10kcal_extract "EEPROM" 20480 2116 + ath10kcal_extract "EEPROM" 0x5000 0x844 ;; wi2a-ac200i) - ath10kcal_extract "ART" 20480 2116 + ath10kcal_extract "ART" 0x5000 0x844 ;; esac ;; @@ -142,26 +142,26 @@ case "$FIRMWARE" in case $board in archer-c5|\ archer-c7) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2) ;; nbg6616|\ nbg6716) - ath10kcal_extract "RFdata" 20480 2116 + ath10kcal_extract "RFdata" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2) ;; om5p-ac) - ath10kcal_extract "ART" 20480 2116 + ath10kcal_extract "ART" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) ;; rb-911g-5hpacd|\ rb-921gs-5hpacd-r2|\ rb-922uags-5hpacd|\ rb-962uigs-5hact2hnt) - ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 20480 2116 + ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 0x5000 0x844 ;; wlr8100) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1) ;; esac @@ -174,18 +174,18 @@ case "$FIRMWARE" in archer-c60-v1|\ cf-e355ac-v2|\ cf-e375ac) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin ;; archer-c60-v2) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1) ;; cf-e385ac) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ;; esac ;; diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index b4c1e1d26d..f183bc5720 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -12,8 +12,8 @@ ath9k_eeprom_die() { ath9k_eeprom_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd mtd=$(find_mtd_chardev $part) @@ -27,7 +27,7 @@ ath9k_eeprom_extract() { ath9k_eeprom_extract_reverse() { local part=$1 local offset=$2 - local count=$3 + local count=$(($3)) local mtd local reversed local caldata @@ -59,8 +59,8 @@ xor() { ath9k_patch_fw_mac() { local mac=$1 - local mac_offset=$2 - local chksum_offset=$3 + local mac_offset=$(($2)) + local chksum_offset=$(($3)) local xor_mac local xor_fw_mac local xor_fw_chksum @@ -98,12 +98,12 @@ case "$FIRMWARE" in "ath9k-eeprom-ahb-18100000.wmac.bin") case $board in avm,fritz4020) - ath9k_eeprom_extract_reverse "urlader" 5441 1088 + ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440 ;; dlink,dir-825-c1|\ dlink,dir-835-a1) - ath9k_eeprom_extract "art" 4096 1088 - ath9k_patch_fw_mac_crc $(mtd_get_mac_text "mac" 0x4) 2 + ath9k_eeprom_extract "art" 0x1000 0x440 + ath9k_patch_fw_mac_crc $(mtd_get_mac_text "mac" 0x4) 0x2 ;; dlink,dir-842-c1|\ dlink,dir-842-c2|\ @@ -111,28 +111,28 @@ case "$FIRMWARE" in dlink,dir-859-a1|\ nec,wg1200cr|\ wd,mynet-n750) - ath9k_eeprom_extract "art" 4096 1088 - ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 2 + ath9k_eeprom_extract "art" 0x1000 0x440 + ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 0x2 ;; engenius,ecb1750) - ath9k_eeprom_extract "art" 4096 1088 - ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1) 2 + ath9k_eeprom_extract "art" 0x1000 0x440 + ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1) 0x2 ;; engenius,epg5000|\ iodata,wn-ac1167dgr|\ iodata,wn-ac1600dgr|\ iodata,wn-ac1600dgr2|\ iodata,wn-ag300dgr) - ath9k_eeprom_extract "art" 4096 1088 - ath9k_patch_fw_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 2 + ath9k_eeprom_extract "art" 0x1000 0x440 + ath9k_patch_fw_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 0x2 ;; nec,wg800hp) - ath9k_eeprom_extract "art" 4096 1088 - ath9k_patch_fw_mac $(mtd_get_mac_text board_data 0x680) 2 + ath9k_eeprom_extract "art" 0x1000 0x440 + ath9k_patch_fw_mac $(mtd_get_mac_text board_data 0x680) 0x2 ;; qihoo,c301) - ath9k_eeprom_extract "radiocfg" 4096 1088 - ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 2 + ath9k_eeprom_extract "radiocfg" 0x1000 0x440 + ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 0x2 ;; *) ath9k_eeprom_die "board $board is not supported yet" @@ -142,28 +142,28 @@ case "$FIRMWARE" in "ath9k-eeprom-pci-0000:00:00.0.bin") case $board in avm,fritz300e) - ath9k_eeprom_extract_reverse "urloader" 5441 1088 + ath9k_eeprom_extract_reverse "urloader" 0x1541 0x440 ;; buffalo,whr-g301n|\ buffalo,wzr-hp-g302h-a1a0|\ tplink,tl-wr841-v5|\ tplink,tl-wr941-v4) - ath9k_eeprom_extract "art" 4096 3768 + ath9k_eeprom_extract "art" 0x1000 0xeb8 ;; buffalo,wzr-hp-g450h) - ath9k_eeprom_extract "art" 4096 1088 + ath9k_eeprom_extract "art" 0x1000 0x440 ;; dlink,dir-825-c1|\ dlink,dir-835-a1) - ath9k_eeprom_extract "art" 20480 1088 - ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1) 2 + ath9k_eeprom_extract "art" 0x5000 0x440 + ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1) 0x2 ;; ocedo,raccoon|\ tplink,tl-wdr3600-v1|\ tplink,tl-wdr4300-v1|\ tplink,tl-wdr4900-v2|\ winchannel,wb2000) - ath9k_eeprom_extract "art" 20480 1088 + ath9k_eeprom_extract "art" 0x5000 0x440 ;; netgear,wnr612-v2|\ on,n150r|\ @@ -181,21 +181,21 @@ case "$FIRMWARE" in ubnt,bullet-m|\ ubnt,nano-m|\ ubnt,rocket-m) - ath9k_eeprom_extract "art" 4096 4096 + ath9k_eeprom_extract "art" 0x1000 0x1000 ;; pqi,air-pen) - ath9k_eeprom_extract "art" 4096 2002 + ath9k_eeprom_extract "art" 0x1000 0x7d2 ;; ubnt,unifi) - ath9k_eeprom_extract "art" 4096 2048 + ath9k_eeprom_extract "art" 0x1000 0x800 ;; wd,mynet-n750) - ath9k_eeprom_extract "art" 20480 1088 - ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan5mac") 2 + ath9k_eeprom_extract "art" 0x5000 0x440 + ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan5mac") 0x2 ;; wd,mynet-wifi-rangeextender) - ath9k_eeprom_extract "art" 4096 4096 - ath9k_patch_fw_mac_crc $(nvram get wl0_hwaddr) "$mac" 2 + ath9k_eeprom_extract "art" 0x1000 0x1000 + ath9k_patch_fw_mac_crc $(nvram get wl0_hwaddr) "$mac" 0x2 ;; *) ath9k_eeprom_die "board $board is not supported yet" @@ -208,11 +208,11 @@ case "$FIRMWARE" in netgear,wndr3700|\ netgear,wndr3700v2|\ netgear,wndr3800) - ath9k_eeprom_extract "art" 4096 3768 + ath9k_eeprom_extract "art" 0x1000 0xeb8 ;; dlink,dir-825-b1) - ath9k_eeprom_extract "caldata" 4096 3768 - ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 524 + ath9k_eeprom_extract "caldata" 0x1000 0xeb8 + ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 0x20c ;; *) ath9k_eeprom_die "board $board is not supported yet" @@ -225,11 +225,11 @@ case "$FIRMWARE" in netgear,wndr3700|\ netgear,wndr3700v2|\ netgear,wndr3800) - ath9k_eeprom_extract "art" 20480 3768 + ath9k_eeprom_extract "art" 0x5000 0xeb8 ;; dlink,dir-825-b1) - ath9k_eeprom_extract "caldata" 20480 3768 - ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 524 + ath9k_eeprom_extract "caldata" 0x5000 0xeb8 + ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 0x20c ;; *) ath9k_eeprom_die "board $board is not supported yet" diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index be2b6f1891..421fb7d66c 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -25,8 +25,8 @@ ath10kcal_die() { ath10kcal_from_file() { local source=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ ath10kcal_die "failed to extract calibration data from $source" @@ -34,8 +34,8 @@ ath10kcal_from_file() { ath10kcal_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd mtd=$(find_mtd_chardev $part) @@ -90,7 +90,7 @@ case "$FIRMWARE" in comfast,cf-wr650ac-v1|\ comfast,cf-wr650ac-v2|\ yuncore,a770) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ;; devolo,dvl1200e|\ devolo,dvl1200i|\ @@ -98,53 +98,53 @@ case "$FIRMWARE" in devolo,dvl1750e|\ devolo,dvl1750i|\ devolo,dvl1750x) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x0) -1) ;; dlink,dir-859-a1) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac") ;; elecom,wrc-1750ghbk2-i) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ;; engenius,ecb1750) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr) ;; engenius,epg5000|\ iodata,wn-ac1167dgr|\ iodata,wn-ac1600dgr2) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1) ;; engenius,ews511ap) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) ;; glinet,gl-ar750s) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1) ;; glinet,gl-x750) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2) ;; nec,wg800hp) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac_crc $(mtd_get_mac_text board_data 0x880) ;; ocedo,koala|\ ocedo,ursus) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_binary art 0xc) ;; openmesh,om5p-ac-v2) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) ;; qihoo,c301) - ath10kcal_extract "radiocfg" 20480 2116 + ath10kcal_extract "radiocfg" 0x5000 0x844 ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac) ;; tplink,archer-a7-v5|\ @@ -152,29 +152,29 @@ case "$FIRMWARE" in tplink,archer-c7-v4|\ tplink,archer-c7-v5|\ tplink,archer-c25-v1) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1) ;; tplink,archer-c5-v1|\ tplink,archer-c7-v2) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1) ;; tplink,archer-d50-v1) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2) ;; tplink,re350k-v1) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2) ;; tplink,re355-v1|\ tplink,re450-v1) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2) ;; tplink,re450-v2) - ath10kcal_extract "art" 20480 2116 + ath10kcal_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1) ;; ubnt,unifiac-lite|\ @@ -185,7 +185,7 @@ case "$FIRMWARE" in ubnt,nanostation-ac|\ ubnt,nanostation-ac-loco|\ ubnt,unifiac-pro) - ath10kcal_extract "EEPROM" 20480 2116 + ath10kcal_extract "EEPROM" 0x5000 0x844 ;; esac ;; @@ -195,18 +195,18 @@ case "$FIRMWARE" in dlink,dir-842-c2|\ dlink,dir-842-c3|\ nec,wg1200cr) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac) ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin ;; netgear,ex6400|\ netgear,ex7300) - ath10kcal_extract "caldata" 20480 12064 + ath10kcal_extract "caldata" 0x5000 0x2f20 ath10kcal_patch_mac $(mtd_get_mac_binary caldata 0xc) ;; phicomm,k2t) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(k2t_get_mac "5g_mac") ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin @@ -216,7 +216,7 @@ case "$FIRMWARE" in tplink,archer-c60-v1|\ tplink,archer-c60-v2|\ tplink,archer-c6-v2) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1) ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin diff --git a/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index fe31ed323d..305d5feda5 100644 --- a/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -8,8 +8,8 @@ rt2x00_eeprom_die() { rt2x00_eeprom_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd mtd=$(find_mtd_part $part) @@ -30,11 +30,11 @@ case "$FIRMWARE" in "rt2x00.eeprom" ) case $board in hg556a_c) - rt2x00_eeprom_extract "cal_data" 130560 512 + rt2x00_eeprom_extract "cal_data" 0x1fe00 0x200 ;; hg622 |\ hg655b) - rt2x00_eeprom_extract "cal_data" 0 512 + rt2x00_eeprom_extract "cal_data" 0x0 0x200 ;; *) rt2x00_eeprom_die "board $board is not supported yet" diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index a09678ca95..456017e30b 100644 --- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -23,8 +23,8 @@ ath10kcal_die() { ath10kcal_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd mtd=$(find_mtd_chardev $part) @@ -37,8 +37,8 @@ ath10kcal_extract() { ath10kcal_ubi_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local ubidev local ubi @@ -97,8 +97,8 @@ case "$FIRMWARE" in "ath10k/cal-pci-0000:01:00.0.bin") case "$board" in meraki,mr33) - ath10kcal_ubi_extract "ART" 36864 2116 - ath10kcal_is_caldata_valid "4408" || ath10kcal_extract "ART" 36864 2116 + ath10kcal_ubi_extract "ART" 0x9000 0x844 + ath10kcal_is_caldata_valid "4408" || ath10kcal_extract "ART" 0x9000 0x844 ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +1) ;; esac @@ -106,7 +106,7 @@ case "$FIRMWARE" in "ath10k/pre-cal-pci-0000:01:00.0.bin") case "$board" in asus,map-ac2200) - ath10kcal_ubi_extract "Factory" 36864 12064 + ath10kcal_ubi_extract "Factory" 0x9000 0x2f20 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin ;; @@ -115,12 +115,12 @@ case "$FIRMWARE" in /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") ;; linksys,ea8300) - ath10kcal_extract "ART" 36864 12064 + ath10kcal_extract "ART" 0x9000 0x2f20 # OEM assigns 4 sequential MACs ath10kcal_patch_mac_crc $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4)) ;; openmesh,a62) - ath10kcal_extract "0:ART" 36864 12064 + ath10kcal_extract "0:ART" 0x9000 0x2f20 ;; esac ;; @@ -131,14 +131,14 @@ case "$FIRMWARE" in glinet,gl-b1300 |\ linksys,ea6350v3 |\ qcom,ap-dk01.1-c1) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ;; asus,map-ac2200) - ath10kcal_ubi_extract "Factory" 4096 12064 + ath10kcal_ubi_extract "Factory" 0x1000 0x2f20 ;; asus,rt-ac58u) CI_UBIPART=UBI_DEV - ath10kcal_ubi_extract "Factory" 4096 12064 + ath10kcal_ubi_extract "Factory" 0x1000 0x2f20 ;; avm,fritzbox-4040) /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config") @@ -154,29 +154,29 @@ case "$FIRMWARE" in openmesh,a62 |\ qxwlan,e2600ac-c1 |\ qxwlan,e2600ac-c2) - ath10kcal_extract "0:ART" 4096 12064 + ath10kcal_extract "0:ART" 0x1000 0x2f20 ;; engenius,ens620ext) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2) ;; linksys,ea8300) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2) ;; meraki,mr33) - ath10kcal_ubi_extract "ART" 4096 12064 - ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 4096 12064 + ath10kcal_ubi_extract "ART" 0x1000 0x2f20 + ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2) ;; netgear,ex6100v2 |\ netgear,ex6150v2) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 0x0) ;; zyxel,nbg6617 |\ zyxel,wre6606) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -2) ;; esac @@ -188,14 +188,14 @@ case "$FIRMWARE" in glinet,gl-b1300 |\ linksys,ea6350v3 |\ qcom,ap-dk01.1-c1) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ;; asus,map-ac2200) - ath10kcal_ubi_extract "Factory" 20480 12064 + ath10kcal_ubi_extract "Factory" 0x5000 0x2f20 ;; asus,rt-ac58u) CI_UBIPART=UBI_DEV - ath10kcal_ubi_extract "Factory" 20480 12064 + ath10kcal_ubi_extract "Factory" 0x5000 0x2f20 ;; avm,fritzbox-4040) /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config") @@ -211,29 +211,29 @@ case "$FIRMWARE" in openmesh,a62 |\ qxwlan,e2600ac-c1 |\ qxwlan,e2600ac-c2) - ath10kcal_extract "0:ART" 20480 12064 + ath10kcal_extract "0:ART" 0x5000 0x2f20 ;; engenius,ens620ext) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3) ;; linksys,ea8300) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3) ;; meraki,mr33) - ath10kcal_ubi_extract "ART" 20480 12064 - ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 20480 12064 + ath10kcal_ubi_extract "ART" 0x5000 0x2f20 + ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3) ;; netgear,ex6100v2 |\ netgear,ex6150v2) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 0xc) ;; zyxel,nbg6617 |\ zyxel,wre6606) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(cat /sys/class/net/eth0/address) -1) ;; esac diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 4f21d4a4ef..bdc36070f2 100644 --- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -23,8 +23,8 @@ ath10kcal_die() { ath10kcal_from_file() { local source=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \ ath10kcal_die "failed to extract calibration data from $source" @@ -32,8 +32,8 @@ ath10kcal_from_file() { ath10kcal_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd mtd=$(find_mtd_chardev $part) @@ -80,33 +80,33 @@ case "$FIRMWARE" in "ath10k/pre-cal-pci-0000:01:00.0.bin") case $board in buffalo,wxr-2533dhp) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary ART 0x1e) ;; linksys,ea8500) - ath10kcal_extract "art" 4096 12064 + ath10kcal_extract "art" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +1) ;; nec,wg2600hp) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary PRODUCTDATA 0xc) +1) ;; netgear,d7800 |\ netgear,r7500v2 |\ netgear,r7800) - ath10kcal_extract "art" 4096 12064 + ath10kcal_extract "art" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x6) +1) ;; tplink,c2600) - ath10kcal_extract "radio" 4096 12064 + ath10kcal_extract "radio" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary default-mac 0x8) -1) ;; tplink,vr2600v) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary default-mac 0x0) -1) ;; zyxel,nbg6817) - ath10kcal_extract "0:ART" 4096 12064 + ath10kcal_extract "0:ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1) ;; esac @@ -114,33 +114,33 @@ case "$FIRMWARE" in "ath10k/pre-cal-pci-0001:01:00.0.bin") case $board in buffalo,wxr-2533dhp) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary ART 0x18) ;; linksys,ea8500) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +2) ;; nec,wg2600hp) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary PRODUCTDATA 0xc) ;; netgear,d7800 |\ netgear,r7500v2 |\ netgear,r7800) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x6) +2) ;; tplink,c2600) - ath10kcal_extract "radio" 20480 12064 + ath10kcal_extract "radio" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary default-mac 0x8) ;; tplink,vr2600v) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary default-mac 0x0) ;; zyxel,nbg6817) - ath10kcal_extract "0:ART" 20480 12064 + ath10kcal_extract "0:ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) ;; esac diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom index aec963a721..82f6885221 100644 --- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom +++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom @@ -30,7 +30,7 @@ ath9k_eeprom_die() { ath9k_eeprom_extract_raw() { local source=$1 - local offset=$2 + local offset=$(($2)) local swap=$3 local size=4096 local bs=1 @@ -50,7 +50,7 @@ ath9k_eeprom_extract_raw() { ath9k_eeprom_extract_reverse() { local part=$1 local offset=$2 - local count=$3 + local count=$(($3)) local mtd local reversed local caldata @@ -102,8 +102,8 @@ ath9k_patch_fw_mac_crc() { ath9k_patch_fw_mac() { local mac=$1 - local mac_offset=$2 - local chksum_offset=$3 + local mac_offset=$(($2)) + local chksum_offset=$(($3)) local xor_mac local xor_fw_mac local xor_fw_chksum @@ -135,40 +135,40 @@ case "$FIRMWARE" in case "$board" in arcadyan,arv7518pw) - ath9k_eeprom_extract "boardconfig" 1024 1 + ath9k_eeprom_extract "boardconfig" 0x400 1 ;; arcadyan,arv8539pw22) - ath9k_eeprom_extract "art" 1024 1 + ath9k_eeprom_extract "art" 0x400 1 ;; bt,homehub-v2b) - ath9k_eeprom_extract "art" 0 1 - ath9k_patch_fw_mac_crc "00:00:00:00:00:00" 524 + ath9k_eeprom_extract "art" 0x0 1 + ath9k_patch_fw_mac_crc "00:00:00:00:00:00" 0x20c ;; bt,homehub-v3a) - ath9k_eeprom_extract "art-copy" 0 1 - ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot_env ethaddr) +2) 268 + ath9k_eeprom_extract "art-copy" 0x0 1 + ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot_env ethaddr) +2) 0x10c ;; bt,homehub-v5a) - ath9k_ubi_eeprom_extract "caldata" 4096 0 - ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) +2) 268 + ath9k_ubi_eeprom_extract "caldata" 0x1000 0 + ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) +2) 0x10c ;; netgear,dgn3500|netgear,dgn3500b) - ath9k_eeprom_extract "calibration" 61440 0 - ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 524 + ath9k_eeprom_extract "calibration" 0xf000 0 + ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 0x20c ;; avm,fritz3370-rev2-hynix|\ avm,fritz3370-rev2-micron|\ avm,fritz7362sl) - ath9k_eeprom_extract_reverse "urlader" 5441 1088 + ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440 ;; avm,fritz7312|avm,fritz7320|avm,fritz7360sl) - ath9k_eeprom_extract "urlader" 2437 0 + ath9k_eeprom_extract "urlader" 0x985 0 ;; avm,fritz7412) /usr/bin/fritz_cal_extract -i 1 -s 0x1e000 -e 0x207 -l 4096 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader") ;; tplink,tdw8970|tplink,tdw8980) - ath9k_eeprom_extract "boardconfig" 135168 0 + ath9k_eeprom_extract "boardconfig" 0x21000 0 ;; *) ath9k_eeprom_die "board $board is not supported yet" diff --git a/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index b02c891cbf..dc66226d7b 100644 --- a/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/mpc85xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -9,8 +9,8 @@ ath9k_eeprom_die() { ath9k_eeprom_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd mtd=$(find_mtd_chardev $part) @@ -43,7 +43,7 @@ case "$FIRMWARE" in "pci_wmac0.eeprom") case $board in tplink,tl-wdr4900-v1) - ath9k_eeprom_extract "caldata" 4096 2048 + ath9k_eeprom_extract "caldata" 0x1000 0x800 tpl_set_wireless_mac 0 ;; *) @@ -55,7 +55,7 @@ case "$FIRMWARE" in "pci_wmac1.eeprom") case $board in tplink,tl-wdr4900-v1) - ath9k_eeprom_extract "caldata" 20480 2048 + ath9k_eeprom_extract "caldata" 0x5000 0x800 tpl_set_wireless_mac -1 ;; *) diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 6e68f7603d..7b98936ec3 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -7,8 +7,8 @@ rt2x00_eeprom_die() { rt2x00_eeprom_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd mtd=$(find_mtd_part $part) @@ -68,7 +68,7 @@ case "$FIRMWARE" in ;; dovado,tiny-ac) wifi_mac=$(mtd_get_mac_ascii u-boot-env INIC_MAC_ADDR) - rt2x00_eeprom_extract "factory" 0 512 + rt2x00_eeprom_extract "factory" 0x0 0x200 rt2x00_eeprom_set_macaddr $wifi_mac ;; *) -- 2.20.1 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
