The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
--- Begin Message ---
The Powerline system needs a "Lan name" in order to synchronize teh
devices.
How this is translated in OpenWrt ?
On 2019-08-11 03:47, Lech Perczak wrote:
W dniu 2019-08-10 o 16:30, Enrico Mioso pisze:
Hello!
I guess this is in a case-by-case basis - I have a TP-Link RE450 which is supported.
I know there are also Wi-Fi-only devices, but don't think OpenWRt supports any of them.
I guess this happens also due to the amount of flash and RAM memory those devices have.
And - if you're going for the RE450, keep in mind it's u-boot doesn't seem to have any recovery method, so soldering an UART right away maybe a good option.
Enrico
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
RE450 is Wifi-only.
There is actually one supported:
https://openwrt.org/toh/hwdata/tp-link/tp-link_tl-wpa8630
--
Pozdrawiam,
Lech Perczak
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
--- End Message ---
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
