Hi! On Thu, Aug 15, 2019 at 4:26 PM Serge Vasilugin <vasilu...@yandex.ru> wrote: > > Adding support for tplink archer c5 v4 some problems arise: > 1. Device use unsupported rtl8367s switch. > 2. rtl8367s switch have non default 0 phy address at mii-bus (29). > 3. rtl8367s switch is connected through unsupported extended interface 2. > > The patches resolve these problems. Many info and sources were used from > forum topic [0]. Vendor driver and u-boot identify rtl8367s as RTL8367C > so I keep it. > All thease patches may be backported to previous release without changes
There are some review comments about this driver on GitHub PR#2174 [0] Would you mind to check it out there? (v2 patch could still be sent here on the mailing list) > > [0] https://forum.openwrt.org/t/support-for-new-archer-c5-v4 > > --- > serge > Regards, Chuanhong Guo [0] https://github.com/openwrt/openwrt/pull/2174 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel