From: Rafał Miłecki <[email protected]> $CONF_TAR shouldn't be assumed to always point to the sysupgrade.tgz. This change makes code more generic and allows refactoring $CONF_TAR.
Signed-off-by: Rafał Miłecki <[email protected]> --- target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh | 2 +- target/linux/brcm2708/base-files/lib/upgrade/platform.sh | 2 +- target/linux/imx6/base-files/lib/upgrade/platform.sh | 2 +- target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh | 2 +- target/linux/mediatek/base-files/lib/upgrade/platform.sh | 2 +- target/linux/mvebu/base-files/lib/upgrade/linksys.sh | 2 +- target/linux/mvebu/base-files/lib/upgrade/sdcard.sh | 2 +- target/linux/mvebu/base-files/lib/upgrade/uDPU.sh | 2 +- target/linux/octeon/base-files/lib/upgrade/platform.sh | 2 +- target/linux/omap/base-files/lib/upgrade/platform.sh | 2 +- target/linux/sunxi/base-files/lib/upgrade/platform.sh | 2 +- target/linux/tegra/base-files/lib/upgrade/platform.sh | 2 +- target/linux/x86/base-files/lib/upgrade/platform.sh | 2 +- 13 files changed, 13 insertions(+), 13 deletions(-) diff --git a/target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh b/target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh index 01327d926a..e3de6ed0b5 100644 --- a/target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh +++ b/target/linux/apm821xx/base-files/lib/upgrade/wdbook.sh @@ -88,7 +88,7 @@ mbl_copy_config() { if export_partdevice partdev 1; then mount -t ext4 -o rw,noatime "/dev/$partdev" /mnt - cp -af "$CONF_TAR" /mnt/ + cp -af "$CONF_TAR" "/mnt/$BACKUP_FILE" umount /mnt fi } diff --git a/target/linux/brcm2708/base-files/lib/upgrade/platform.sh b/target/linux/brcm2708/base-files/lib/upgrade/platform.sh index 693cde7779..48994ebe07 100644 --- a/target/linux/brcm2708/base-files/lib/upgrade/platform.sh +++ b/target/linux/brcm2708/base-files/lib/upgrade/platform.sh @@ -91,7 +91,7 @@ platform_copy_config() { if export_partdevice partdev 1; then mkdir -p /boot [ -f /boot/kernel.img ] || mount -t vfat -o rw,noatime "/dev/$partdev" /boot - cp -af "$CONF_TAR" /boot/ + cp -af "$CONF_TAR" "/boot/$BACKUP_FILE" tar -C / -zxvf "$CONF_TAR" boot/config.txt sync unmount /boot diff --git a/target/linux/imx6/base-files/lib/upgrade/platform.sh b/target/linux/imx6/base-files/lib/upgrade/platform.sh index 0dfaf0163d..f72e552a36 100755 --- a/target/linux/imx6/base-files/lib/upgrade/platform.sh +++ b/target/linux/imx6/base-files/lib/upgrade/platform.sh @@ -17,7 +17,7 @@ enable_image_metadata_check apalis_copy_config() { apalis_mount_boot - cp -af "$CONF_TAR" /boot/ + cp -af "$CONF_TAR" "/boot/$BACKUP_FILE" sync umount /boot } diff --git a/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh b/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh index 8888ec7d04..e9fb0ad388 100644 --- a/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh +++ b/target/linux/ipq806x/base-files/lib/upgrade/zyxel.sh @@ -60,7 +60,7 @@ zyxel_do_flash() { mkdir /tmp/new_root mount -t ext4 $loopdev /tmp/new_root && { echo "Saving config to rootfs_data at position ${offset}." - cp -v "$CONF_TAR" /tmp/new_root/ + cp -v "$CONF_TAR" "/tmp/new_root/$BACKUP_FILE" umount /tmp/new_root } diff --git a/target/linux/mediatek/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/base-files/lib/upgrade/platform.sh index d812a48720..d1b9fdeb95 100755 --- a/target/linux/mediatek/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/base-files/lib/upgrade/platform.sh @@ -54,7 +54,7 @@ platform_check_image() { platform_copy_config_emmc() { mkdir -p /recovery mount -o rw,noatime /dev/mmcblk0p1 /recovery - cp -af "$CONF_TAR" /recovery/ + cp -af "$CONF_TAR" "/recovery/$BACKUP_FILE" sync umount /recovery } diff --git a/target/linux/mvebu/base-files/lib/upgrade/linksys.sh b/target/linux/mvebu/base-files/lib/upgrade/linksys.sh index 857c550c73..5104db31f3 100644 --- a/target/linux/mvebu/base-files/lib/upgrade/linksys.sh +++ b/target/linux/mvebu/base-files/lib/upgrade/linksys.sh @@ -93,6 +93,6 @@ platform_do_upgrade_linksys() { } platform_copy_config_linksys() { - cp -f "$CONF_TAR" /tmp/syscfg/ + cp -f "$CONF_TAR" "/tmp/syscfg/$BACKUP_FILE" sync } diff --git a/target/linux/mvebu/base-files/lib/upgrade/sdcard.sh b/target/linux/mvebu/base-files/lib/upgrade/sdcard.sh index 3bfdce97e8..03f6327657 100644 --- a/target/linux/mvebu/base-files/lib/upgrade/sdcard.sh +++ b/target/linux/mvebu/base-files/lib/upgrade/sdcard.sh @@ -106,7 +106,7 @@ platform_copy_config_sdcard() { if export_partdevice partdev 1; then mkdir -p /boot [ -f /boot/kernel.img ] || mount -o rw,noatime /dev/$partdev /boot - cp -af "$CONF_TAR" /boot/ + cp -af "$CONF_TAR" "/boot/$BACKUP_FILE" sync umount /boot fi diff --git a/target/linux/mvebu/base-files/lib/upgrade/uDPU.sh b/target/linux/mvebu/base-files/lib/upgrade/uDPU.sh index f87ff4f9ca..dbcff58368 100644 --- a/target/linux/mvebu/base-files/lib/upgrade/uDPU.sh +++ b/target/linux/mvebu/base-files/lib/upgrade/uDPU.sh @@ -150,7 +150,7 @@ platform_do_upgrade_uDPU() { platform_copy_config_uDPU() { # Config is saved on the /misc partition and copied on the rootfs after the reboot if [ -f "$CONF_TAR" ]; then - cp -f "$CONF_TAR" /misc + cp -f "$CONF_TAR" "/misc/$BACKUP_FILE" sync fi } diff --git a/target/linux/octeon/base-files/lib/upgrade/platform.sh b/target/linux/octeon/base-files/lib/upgrade/platform.sh index 0e4ca37629..6233c337bc 100755 --- a/target/linux/octeon/base-files/lib/upgrade/platform.sh +++ b/target/linux/octeon/base-files/lib/upgrade/platform.sh @@ -25,7 +25,7 @@ platform_copy_config() { case "$(board_name)" in erlite) mount -t vfat /dev/sda1 /mnt - cp -af "$CONF_TAR" /mnt/ + cp -af "$CONF_TAR" "/mnt/$BACKUP_FILE" umount /mnt ;; esac diff --git a/target/linux/omap/base-files/lib/upgrade/platform.sh b/target/linux/omap/base-files/lib/upgrade/platform.sh index c8b0175fd5..a5108c4c02 100644 --- a/target/linux/omap/base-files/lib/upgrade/platform.sh +++ b/target/linux/omap/base-files/lib/upgrade/platform.sh @@ -30,7 +30,7 @@ platform_copy_config() { if export_partdevice partdev 1; then mount -t vfat -o rw,noatime "/dev/$partdev" /mnt - cp -af "$CONF_TAR" /mnt/ + cp -af "$CONF_TAR" "/mnt/$BACKUP_FILE" umount /mnt fi } diff --git a/target/linux/sunxi/base-files/lib/upgrade/platform.sh b/target/linux/sunxi/base-files/lib/upgrade/platform.sh index c8b0175fd5..a5108c4c02 100644 --- a/target/linux/sunxi/base-files/lib/upgrade/platform.sh +++ b/target/linux/sunxi/base-files/lib/upgrade/platform.sh @@ -30,7 +30,7 @@ platform_copy_config() { if export_partdevice partdev 1; then mount -t vfat -o rw,noatime "/dev/$partdev" /mnt - cp -af "$CONF_TAR" /mnt/ + cp -af "$CONF_TAR" "/mnt/$BACKUP_FILE" umount /mnt fi } diff --git a/target/linux/tegra/base-files/lib/upgrade/platform.sh b/target/linux/tegra/base-files/lib/upgrade/platform.sh index 66e7d91e3c..9a8acde9b6 100644 --- a/target/linux/tegra/base-files/lib/upgrade/platform.sh +++ b/target/linux/tegra/base-files/lib/upgrade/platform.sh @@ -47,7 +47,7 @@ platform_copy_config() { if export_partdevice partdev 1; then mount -o rw,noatime "/dev/$partdev" /mnt - cp -af "$CONF_TAR" /mnt/ + cp -af "$CONF_TAR" "/mnt/$BACKUP_FILE" umount /mnt fi } diff --git a/target/linux/x86/base-files/lib/upgrade/platform.sh b/target/linux/x86/base-files/lib/upgrade/platform.sh index 162dbaf3aa..855752b5d7 100644 --- a/target/linux/x86/base-files/lib/upgrade/platform.sh +++ b/target/linux/x86/base-files/lib/upgrade/platform.sh @@ -39,7 +39,7 @@ platform_copy_config() { if export_partdevice partdev 1; then mount -t ext4 -o rw,noatime "/dev/$partdev" /mnt - cp -af "$CONF_TAR" /mnt/ + cp -af "$CONF_TAR" "/mnt/$BACKUP_FILE" umount /mnt fi } -- 2.21.0 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
