In 555ca422d1cb ("ramips: fix D-Link DIR-615 H1 switch port mapping"), port setup for dir-615-h1 was changed without removing the old one. This was working as the new one was triggered earlier than the old one.
(In the meantine, changed sorting during ramips rename patches actually inversed that order.) Anyway, just remove the wrong case now. Signed-off-by: Adrian Schmutzler <freif...@adrianschmutzler.de> --- This should also be backported to 19.07. Due to the ramips rename this will need a different patch which I will send if this one is accepted. --- target/linux/ramips/base-files/etc/board.d/02_network | 1 - 1 file changed, 1 deletion(-) diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 92067ac7da..091b627cca 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -49,7 +49,6 @@ ramips_setup_interfaces() dlink,dir-300-b7|\ dlink,dir-320-b1|\ dlink,dir-610-a1|\ - dlink,dir-615-h1|\ dlink,dir-810l|\ dlink,dwr-116-a1|\ dlink,dwr-921-c1|\ -- 2.20.1 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel