The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped automatically by the mailing list software.
--- Begin Message ---Hi, I tested your v2 patch. It's working but I found some issues. There is no adb-enablemodem so httpd on LTE module won't start. I understand it's hardly an issue for you but most users may find it a serious drawback when compared to ar71xx version. There is some problem with kernel detecting that eth0 is disconnected. It is always shown as up (with carrier) and LAN LED won't ever turn off. If you need help to fix this let me know. Filip On Tue, Sep 17, 2019 at 09:30:29PM +0200, Enrico Mioso wrote: > This device is an LTE router supported in ar71xx. > As per original commit, hardware specifications (v1.0 EU): > - SoC: QCA9531 > - Flash: Winbond W25Q64FV (8MiB) > - RAM: EtronTech EM6AB160TSE-5G (64MiB) > - Wireless: SoC platform only (2.4GHz b/g/n, 2x internal antenna) > - Ethernet: 2NIC (3x100M + 1x100M) > - WWAN: TP-LINK LTE MODULE (2x external detachable antenna) > - Power: DC 12V 1A > > Flashing instructions: > You can flash via tftp recovery (serve factory image as > /mr6400_tp_recovery.bin > on 192.168.0.66/24, connect to any ethernet port and power on device while > holding the reset button). Flashing via OEM web interface does not work. > > Working: > - Wi-Fi > - TP-Link LTE module does it's thing (but see Notes) > - reset/rfkill keys > > Untested: > - recovery via factory > - leds > > (I promise I'll test untested items as well in final version.) > > Issues: > switch configuration currently broken (port 2 on device is seen as port 3, > port 3 as port 2). > > Note: as it happened occasionally in ar71xx, during bursty flash activity, > LTE module init will fail, with USB enumeration errors. > > V1->V2: > - addressed most comments, except for SUPPORTED_DEVICES > > Signed-off-by: Enrico Mioso <[email protected]> > CC: Filip Moc <[email protected]> > CC: Piotr Dymacz <[email protected]> > --- > { > This version is not meant to be definite nor merged. I'll be laving tomorrow, > and will be back sunday, so I wanted to post this version so in case you have > visibility over last changes. > Thanks! > Enrico > } > .../ath79/base-files/etc/board.d/01_leds | 5 + > .../ath79/base-files/etc/board.d/02_network | 5 + > .../ath79/dts/qca9531_tplink_tl-mr6400-v1.dts | 172 ++++++++++++++++++ > target/linux/ath79/image/generic-tp-link.mk | 10 + > 4 files changed, 192 insertions(+) > create mode 100644 target/linux/ath79/dts/qca9531_tplink_tl-mr6400-v1.dts > > diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds > b/target/linux/ath79/base-files/etc/board.d/01_leds > index 778316e450..385ac8d9ca 100755 > --- a/target/linux/ath79/base-files/etc/board.d/01_leds > +++ b/target/linux/ath79/base-files/etc/board.d/01_leds > @@ -130,6 +130,11 @@ tplink,archer-c7-v5) > ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" > "0x10" > ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" > "0x20" > ;; > +tplink,tl-mr6400-v1) > + ucidef_set_led_netdev "lan" "LAN" "tp-link:white:lan" "eth0" > + ucidef_set_led_netdev "wan" "WAN" "tp-link:white:wan" "eth1" > + ucidef_set_led_netdev "4g" "4G" "tp-link:white:4g" "usb0" > + ;; > tplink,archer-c2-v3|\ > tplink,tl-wr1043nd-v4|\ > tplink,tl-wr1043n-v5) > diff --git a/target/linux/ath79/base-files/etc/board.d/02_network > b/target/linux/ath79/base-files/etc/board.d/02_network > index 5b47af8ef7..2b0e1ce400 100755 > --- a/target/linux/ath79/base-files/etc/board.d/02_network > +++ b/target/linux/ath79/base-files/etc/board.d/02_network > @@ -56,6 +56,11 @@ ath79_setup_interfaces() > winchannel,wb2000) > ucidef_set_interface_lan "eth0" > ;; > + tplink,tl-mr6400-v1) > + ucidef_set_interfaces_lan_wan "eth0.1 eth1" "usb0" > + ucidef_add_switch "switch0" \ > + "0@eth0" "1:lan" "2:lan" "3:lan" > + ;; > avm,fritz4020|\ > pcs,cr3000|\ > tplink,archer-c58-v1|\ > diff --git a/target/linux/ath79/dts/qca9531_tplink_tl-mr6400-v1.dts > b/target/linux/ath79/dts/qca9531_tplink_tl-mr6400-v1.dts > new file mode 100644 > index 0000000000..a2c006f05e > --- /dev/null > +++ b/target/linux/ath79/dts/qca9531_tplink_tl-mr6400-v1.dts > @@ -0,0 +1,172 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > + > +#include "qca953x.dtsi" > + > +/ { > + compatible = "tplink,tl-mr6400-v1", "qca,qca9531"; > + model = "TP-Link TL-MR6400 v1"; > + > + aliases { > + led-boot = &led_power; > + led-failsafe = &led_power; > + led-running = &led_power; > + led-upgrade = &led_power; > + }; > + > + gpio_leds: leds { > + compatible = "gpio-leds"; > + > + /* D12 */ > + wan { > + label = "tp-link:white:wan"; > + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; > + }; > + > + /* D11 */ > + 4g { > + label = "tp-link:white:4g"; > + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; > + }; > + > + /* D5 */ > + wps { > + label = "tp-link:white:wps"; > + gpios = <&gpio 3 GPIO_ACTIVE_HIGH>; > + }; > + > + /* D3 */ > + wlan { > + label = "tp-link:white:wlan"; > + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "phy0tpt"; > + }; > + > + /* D2 */ > + led_power: power { > + label = "tp-link:white:power"; > + gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; > + }; > + > + /* D4 */ > + lan { > + label = "tp-link:white:lan"; > + gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; > + }; > + }; > + > + keys { > + compatible = "gpio-keys"; > + > + /* SW2 */ > + reset { > + label = "Reset button"; > + linux,code = <KEY_RESTART>; > + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; > + debounce-interval = <60>; > + }; > + > + /* SW3 */ > + rfkill { > + label = "RFKill button"; > + linux,code = <KEY_RFKILL>; > + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; > + debounce-interval = <60>; > + }; > + }; > +}; > + > +&uart { > + status = "okay"; > +}; > + > +&spi { > + status = "okay"; > + num-cs = <1>; > + > + flash@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "jedec,spi-nor"; > + reg = <0>; > + spi-max-frequency = <10000000>; > + > + partitions { > + compatible = "fixed-partitions"; > + #address-cells = <1>; > + #size-cells = <1>; > + > + uboot: partition@0 { > + label = "u-boot"; > + reg = <0x000000 0x020000>; > + read-only; > + }; > + > + partition@20000 { > + compatible = "tplink,firmware"; > + label = "firmware"; > + reg = <0x020000 0x7d0000>; > + }; > + > + art: partition@7f0000 { > + label = "art"; > + reg = <0x7f0000 0x010000>; > + read-only; > + }; > + }; > + }; > +}; > + > +ð0 { > + status = "okay"; > + phy-mode = "mii"; > + phy-handle = <&swphy0>; > + > + mtd-mac-address = <&uboot 0x1fc00>; > + mtd-mac-address-increment = <1>; > + > + gmac-config { > + device = <&gmac>; > + switch-phy-swap = <1>; > + switch-phy-addr-swap = <1>; > + }; > +}; > + > +ð1 { > + status = "okay"; > + mtd-mac-address = <&uboot 0x1fc00>; > + mtd-mac-address-increment = <(-1)>; > +}; > + > +&wmac { > + status = "okay"; > + mtd-cal-data = <&art 0x1000>; > + mtd-mac-address = <&uboot 0x1fc00>; > +}; > + > +&usb0 { > + #address-cells = <1>; > + #size-cells = <0>; > + status = "okay"; > + > + hub_port: port@1 { > + reg = <1>; > + #trigger-source-cells = <0>; > + }; > +}; > + > +&usb_phy { > + status = "okay"; > +}; > + > +&gpio { > + lte_power { > + gpio-hog; > + gpios = <4 GPIO_ACTIVE_HIGH>; > + output-low; > + line-name = "tp-link:power:LTE"; > + }; > +}; > diff --git a/target/linux/ath79/image/generic-tp-link.mk > b/target/linux/ath79/image/generic-tp-link.mk > index 5519e9c960..78d7810f29 100644 > --- a/target/linux/ath79/image/generic-tp-link.mk > +++ b/target/linux/ath79/image/generic-tp-link.mk > @@ -393,6 +393,16 @@ define Device/tplink_tl-wr810n-v1 > endef > TARGET_DEVICES += tplink_tl-wr810n-v1 > > +define Device/tplink_tl-mr6400-v1 > + $(Device/tplink-8mlzma) > + ATH_SOC := qca9531 > + DEVICE_MODEL := TL-MR6400 > + DEVICE_VARIANT := v1 > + TPLINK_HWID := 0x64000001 > + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-net kmod-usb-net-rndis > kmod-usb-serial kmod-usb-serial-option adb > +endef > +TARGET_DEVICES += tplink_tl-mr6400-v1 > + > define Device/tplink_tl-wr810n-v2 > $(Device/tplink-8mlzma) > ATH_SOC := qca9533 > -- > 2.23.0 >
--- End Message ---
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
