Hi, > > Have you checked that there are no usable addresses in 0x1002 and > > 0x5006? > > > Yes, there are wireless addresses inside calibration data at offsets you > provided, and they are both equal to LAN MAC.
Okay, so for &wmac that would mean it should correctly read the address from calibration data even if you do not specify it. Thus, you should be able to remove the mtd-mac-address for wmac and still have the correct MAC address. For 0x5006 this is more interesting, as it implies that the vendor puts a "wrong" MAC address into the calibration data. However, since you have verified it, it seems appropriate to overwrite the address in calibration with mtd-mac-address in this case. Note that if you remove the mtd-mac-address for wmac, you will need to change the label-mac-device alias to ð0 then. Best Adrian > > Best regards > Michal > > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/mailman/listinfo/openwrt-devel
openpgp-digital-signature.asc
Description: PGP signature
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
