Please see new file names and checksums below:
988x
3b2c584f7070c3e286ce27a370cc181d70b45f9cdaa462fb4f44c6c20d2ee8c1
firmware-2-ct-full-community-22.bin.lede.012
a7042b2c90de82b21e87f243411b6fb12142bb4fb28266ea92cdf3101557b6de
firmware-2-ct-full-htt-mgt-community-22.bin.lede.012
/home/greearb/candela_html/downloads
9887
c3f891b2cd4e225e1c635a328af3dce94481b096432020e445f71144dda749d5
firmware-2-ct-full-community-22.bin.lede.012
f5e9825279d590a2362f44aef4ced345376cccd65d9b826c131d4dbcef4e689c
firmware-2-ct-full-htt-mgt-community-22.bin.lede.012
/home/greearb/candela_html/downloads
9980
4b90fa91dcab68350fe695b3c918cb9a4fb09c2b419519b8b84b71da4cfde5e8
firmware-5-ct-full-community-12.bin-lede.012
6dd40233fe99d99c69781d6514cf9ba7862b3f66c647f7921ca8be6100799986
firmware-5-ct-full-htt-mgt-community-12.bin-lede.012
/home/greearb/candela_html/downloads
9984
2551f5c0bfa6c1b1222bd9452e14f60b8e29c8c0fe85de8af95393f31d544ea3
firmware-5-ct-full-community-12.bin-lede.012
90f947257e1f42496b22cbdd29be99fbc8ea8700045b4ed2380acc980b4c247b
firmware-5-ct-full-htt-mgt-community-12.bin-lede.012
/home/greearb/candela_html/downloads
4019
cd85fc9df8b3652f7b12c2ab745b2a9691dca5ca38f8d65a02003e938ad8b570
firmware-5-ct-full-community-12.bin-lede.012
67a923cda6ec3936ef23ec6c30c80dfc9bfd2cee73a142d2e308e8f035b8ed3a
firmware-5-ct-full-htt-mgt-community-12.bin-lede.012
/home/greearb/candela_html/downloads
9888
4bdb71b50c68f1a07c88d21f84a6c054fe1b8cb5bacd089a6b9f0a56448535d3
firmware-5-ct-full-community-12.bin-lede.012
e1f0242a91af58ec5628bb4f7c015f6c8dba55f92e2813f8f0b97c86ec496d2d
firmware-5-ct-full-htt-mgt-community-12.bin-lede.012
/home/greearb/candela_html/downloads
The release notes since last time for wave-1:
* October 5, 2019: Fix too-short msg caused by invalid use of PayloadLen in
receive path.
This appears to resolve the issue of getting (and
ignoring) too-short commands
when we detect loss of CE interrupts and go into polling
mode.
* October 12, 2019: Fix regression in IBSS mode that caused SWBA overrun
issues. Related to
regression added during the ct-station logic,
specifically TSF allocation.
Thanks for Ahmed Zaki @ Mage-Networks for helping to
diagnose and test.
* October 15, 2019: Only send beacon tx completion events if we can detect
CT driver is being
used (based on CT_STATS_OK flag being set). This
should help CT firmware work
better on stock driver.
The release notes since last time for wave-2:
* October 15, 2019: Only send beacon tx completion events if we can detect
CT driver is being
used (based on ATH10k_USE_TXCOMPL_TXRATE2 |
ATH10k_USE_TXCOMPL_TXRATE1 flags being set).
This should help CT firmware work better on stock
driver.
* October 31, 2019: Compile out peer-ratecode-list-event. ath10k driver
ignores the event.
* November 1, 2019: Fix rate-ctrl related crash when nss and other things
were changed while
station stays associated. See bug:
https://github.com/greearb/ath10k-ct/issues/96
Thanks,
Ben
--
Ben Greear <[email protected]>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
