Use reset-gpio instead of the custom phy-reset-gpio property to do phy
reset on the U4019. phy-reset-gpio was incorrectly introduced when we
added support for the U4019, and will be deprecated.
Signed-off-by: Kristian Evensen <kristian.even...@gmail.com>
---
.../arch/arm/boot/dts/qcom-ipq4019-unielec-u4019.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git
a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-unielec-u4019.dtsi
b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-unielec-u4019.dtsi
index cf67fddd2b..c768e25ca0 100644
---
a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-unielec-u4019.dtsi
+++
b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-unielec-u4019.dtsi
@@ -17,7 +17,8 @@
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
- phy-reset-gpio = <&tlmm 47 0>;
+ reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <2000>;
};
ess-psgmii@98000 {
--
2.20.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
