The script no longer uses any features that necessitate bash. Also removed trailing whitespace.
Signed-off-by: Rosen Penev <[email protected]> --- scripts/flashing/flash.sh | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/scripts/flashing/flash.sh b/scripts/flashing/flash.sh index aea1bf1568..6266a49dc1 100755 --- a/scripts/flashing/flash.sh +++ b/scripts/flashing/flash.sh @@ -1,6 +1,6 @@ -#!/bin/bash +#!/bin/sh # -# tftp flash script for wireless routers +# tftp flash script for wireless routers # # Copyright (C) 2004 by Oleg I. Vdovikin <[email protected]> # Copyright (C) 2005 by Waldemar Brodkorb <[email protected]> @@ -24,10 +24,10 @@ if [ -z "$1" ] || [ ! -f "$1" ] || [ -z "$2" ]; then echo Usage: "$0" firmware vendor cat << EOF IMPORTANT: -Notes for Linksys / Asus WL500gx router: +Notes for Linksys / Asus WL500gx router: be sure you have set boot_wait to yes. Power on your router after executing this script. - + Notes for Asus WL500g router: be sure POWER led is flashing (If this is not the case poweroff the device, push the reset button & power on @@ -54,7 +54,7 @@ echo Confirming IP address setting... printf "get ASUSSPACELINK\x01\x01\xa8\xc0 /dev/null\nquit\n" | tftp 192.168.1.1 echo Flashing 192.168.1.1 using "$1"... printf "binary\nput %s ASUSSPACELINK\nquit\n" "$1" | tftp 192.168.1.1 -echo Please wait until leds stops flashing. +echo Please wait until leds stops flashing. elif [ "$2" = "linksys" ]; then echo Flashing 192.168.1.1 using "$1"... printf "rexmt 1\ntrace\nbinary\nput %s\nquit\n" "$1" | tftp 192.168.1.1 -- 2.24.1 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
