Hi, > -----Original Message----- > From: openwrt-devel [mailto:[email protected]] On > Behalf Of David Bauer > Sent: Dienstag, 28. Januar 2020 21:05 > To: [email protected]; [email protected]; openwrt-devel <openwrt- > [email protected]> > Subject: [OpenWrt-Devel] Netgear R6260 EEPROM location > > Hi, > > while testing my shiny new NETGEAR R6260 with OpenWrt, i was experiencing > very bad > reception as well as throughput. Upon closer inspection, it turns out that the > EEPROM > is read from an incorrect offset. The Offset positions here are: > > - 0x28000 for 5GHz > - 0x20000 for 2.4GHz
Have you checked partitioning? This might just be a wrong position for the factory partition as well. Best Adrian > > Can someone confirm these offsets on their boards? Maybe this is wrong not > only on > the R6260, but also on the R6350 and R6850. > > Best wishes > David > > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
