In RouterBOARD parlance there never was an "art" partition. This partition has always been named 'hard_config' on ar71xx.
This partition contains more than just ART (Atheros Radio Test) data. It includes the hardware description (product code, serial, board identifier, name, hardware options, MAC address), as well as other bits affecting the operation of RouterBoot. To avoid confusion with regular ART data, this partition is renamed in line with historical ar71xx and ramips nomenclature as 'hard_config'. This commit fixes the previous support files and implements the nested RouterBoot partition scheme as already used by ramips-based SPI-NOR RouterBOARD DTSes, as previously reviewed and implemented in bbe2cf657c. Tested-by: Roger Pueyo Centelles <[email protected]> Signed-off-by: Thibaut VARÈNE <[email protected]> --- ...ca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts | 61 +++++++++++++--------- .../etc/hotplug.d/firmware/10-ath9k-eeprom | 4 +- .../etc/hotplug.d/firmware/11-ath10k-caldata | 2 +- 3 files changed, 38 insertions(+), 29 deletions(-) diff --git a/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts b/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts index 015bd2efe5..5fd4623726 100644 --- a/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts +++ b/target/linux/ath79/dts/qca9556_mikrotik_routerboard-wap-g-5hact2hnd.dts @@ -53,7 +53,7 @@ ð1 { status = "okay"; - mtd-mac-address = <&art 0x10>; + mtd-mac-address = <&hard_config 0x10>; pll-data = <0x03000101 0x80000101 0x80001313>; phy-handle = <&phy0>; @@ -81,32 +81,41 @@ #size-cells = <1>; partition@0 { - label = "routerboot"; - reg = <0x000000 0x00e000>; + label = "RouterBoot"; + reg = <0x0 0x20000>; read-only; - }; - - art: partition@e000 { - label = "art"; - reg = <0x000e000 0x001000>; - read-only; - }; - - partition@f000 { - label = "bios"; - reg = <0x000f000 0x001000>; - read-only; - }; - - partition@10000 { - label = "routerboot2"; - reg = <0x010000 0x00f000>; - read-only; - }; - - partition@1f000 { - label = "soft_config"; - reg = <0x001f000 0x001000>; + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader1"; + reg = <0x0 0xe000>; + read-only; + }; + + hard_config: partition@e000 { + label = "hard_config"; + reg = <0xe000 0x1000>; + read-only; + }; + + partition@f000 { + label = "bios"; + reg = <0xf000 0x1000>; + read-only; + }; + + partition@10000 { + label = "bootloader2"; + reg = <0x10000 0xf000>; + read-only; + }; + + partition@1f000 { + label = "soft_config"; + reg = <0x1f000 0x1000>; + }; }; partition@20000 { diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index b06a481c94..66bc3cb880 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -43,8 +43,8 @@ case "$FIRMWARE" in ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr) ;; mikrotik,routerboard-wap-g-5hact2hnd) - mikrotik_caldata_extract "art" 0x1000 0x440 - ath9k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x10) +2) + mikrotik_caldata_extract "hard_config" 0x1000 0x440 + ath9k_patch_mac $(macaddr_add $(mtd_get_mac_binary hard_config 0x10) +2) ;; nec,wg800hp) caldata_extract "art" 0x1000 0x440 diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 2cab8c9754..3e79cd3ca4 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -67,7 +67,7 @@ case "$FIRMWARE" in ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2) ;; mikrotik,routerboard-wap-g-5hact2hnd) - mikrotik_caldata_extract "art" 0x5000 0x844 + mikrotik_caldata_extract "hard_config" 0x5000 0x844 ;; nec,wg800hp) caldata_extract "art" 0x5000 0x844 -- 2.11.0 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
