Signed-off-by: Thibaut VARÈNE <[email protected]> --- .../435-mtd-add-routerbootpart-parser-config.patch | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 target/linux/generic/pending-4.19/435-mtd-add-routerbootpart-parser-config.patch
diff --git a/target/linux/generic/pending-4.19/435-mtd-add-routerbootpart-parser-config.patch b/target/linux/generic/pending-4.19/435-mtd-add-routerbootpart-parser-config.patch new file mode 100644 index 0000000000..2cc91179b1 --- /dev/null +++ b/target/linux/generic/pending-4.19/435-mtd-add-routerbootpart-parser-config.patch @@ -0,0 +1,25 @@ +diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig +index de6f5f8..0afa89c 100644 +--- a/drivers/mtd/parsers/Kconfig ++++ b/drivers/mtd/parsers/Kconfig +@@ -22,3 +22,12 @@ config MTD_SHARPSL_PARTS + This provides the read-only FTL logic necessary to read the partition + table from the NAND flash of Sharp SL Series (Zaurus) and the MTD + partition parser using this code. ++ ++config MTD_ROUTERBOOT_PARTS ++ tristate "RouterBoot flash partition parser" ++ depends on MTD && OF ++ help ++ MikroTik RouterBoot is implemented as a multi segment system on the ++ flash, some of which are fixed and some of which are located at ++ variable offsets. This parser handles both cases via properly ++ formatted DTS. +diff --git a/drivers/mtd/parsers/Makefile b/drivers/mtd/parsers/Makefile +index 44ff342..0543362 100644 +--- a/drivers/mtd/parsers/Makefile ++++ b/drivers/mtd/parsers/Makefile +@@ -1,2 +1,3 @@ + obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o + obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o ++obj-$(CONFIG_MTD_ROUTERBOOT_PARTS) += routerbootpart.o -- 2.11.0 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
