The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
--- Begin Message ---
Hello there,
i have a Tp Link Archer D2 Router and ive managed to get the bin file from
the vr200v installed on the device but after this i stuck with the
following U-Boot Code. I know its not supported yet but maybe this could
help you with developing. I hope that you can fix that easily so i can use
this puppy :)
Have a nice day and stay healthy.
Martin Heck
ROM VER: 1.1.0
CFG 05
ROM VER: 1.1.0
CFG 05
DDR autotuning Rev 1.0
DDR size from 0xa0000000 - 0xa3ffffff
DDR check ok... start booting...
U-Boot 2010.06-svn14778-LANTIQ-v-2.2.67 (Jan 15 2016 - 15:05:13)
CLOCK CPU 500M RAM 250M
16 Bit RAM
DRAM: 64 MiB
Using default environment
In: serial
Out: serial
Err: serial
Net: internal phy using 25Mhz clock
Internal phy firmware version: 0x8435
ar10 Switch16384 KiB S25FL128P_UNI_64K at 0:0 is now current device
MAC: ec-08-6b-91-b8-b0
Type "run flash_nfs" to mount root filesystem over NFS
Hit any key to stop autoboot: 0
16384 KiB S25FL128P_UNI_64K at 0:0 is now current device
Uncompressing ...
Starting kernel ...
[ 0.000000] Linux version 4.14.171 (builder@buildhost) (gcc version
7.5.0 (OpenWrt GCC 7.5.0 r10947-65030d81f3)) #0 SMP Thu Feb 27 21:05:12 2020
[ 0.000000] SoC: xRX300 rev 1.2
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019556 (MIPS 34Kc)
[ 0.000000] MIPS: machine is TP-LINK Archer VR200v
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 07f00000 @ 00000000 (usable)
[ 0.000000] User-defined physical RAM map:
[ 0.000000] memory: 07e00000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Detected 1 available secondary CPU(s)
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases,
linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007dfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007dfffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000000000-0x0000000007dfffff]
[ 0.000000] random: get_random_bytes called from 0x80632740 with
crng_init=0
[ 0.000000] percpu: Embedded 14 pages/cpu s25968 r8192 d23184 u57344
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32004
[ 0.000000] Kernel command line: console=ttyLTQ0,115200 mem=126M
vpe1_load_addr=0x87e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536
bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00000010
[ 0.000000] Readback ErrCtl register=00000010
[ 0.000000] Memory: 119840K/129024K available (5222K kernel code, 197K
rwdata, 908K rodata, 1272K init, 230K bss, 9184K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 256
[ 0.000000] Data bus error, epc == 806352b0, ra == 80635278
[ 0.000000] Oops[#1]:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.171 #0
[ 0.000000] task: 80614840 task.stack: 80602000
[ 0.000000] $ 0 : 00000000 00000001 ffffffff 80770000
[ 0.000000] $ 4 : bf103000 e0000000 00000400 00000001
[ 0.000000] $ 8 : 80618168 805119d0 00000000 00000000
[ 0.000000] $12 : 00000000 00000000 00000000 3d090000
[ 0.000000] $16 : 00000000 80770000 80770000 80770000
[ 0.000000] $20 : 00000001 80770000 83fa0000 80002000
[ 0.000000] $24 : 00000000 00000000
[ 0.000000] $28 : 80602000 80603dd8 81003cf0 80635278
[ 0.000000] Hi : 00000000
[ 0.000000] Lo : 00000000
[ 0.000000] epc : 806352b0 0x806352b0
[ 0.000000] ra : 80635278 0x80635278
[ 0.000000] Status: 11007c02 KERNEL EXL
[ 0.000000] Cause : 5080801c (ExcCode 07)
[ 0.000000] PrId : 00019556 (MIPS 34Kc)
[ 0.000000] Modules linked in:
[ 0.000000] Process swapper/0 (pid: 0, threadinfo=80602000,
task=80614840, tls=00000000)
[ 0.000000] *HwTLS: 00000100
[ 0.000000] Stack : 1e105300 805960dc 80772090 8061814c 00000000
80634b6c 1f101000 803914dc
[ 0.000000] 81002b20 80390c0c 00000000 00000000 1f101000
1f101fff 80798d28 00000006
[ 0.000000] 1f102000 1f102fff 81003c34 00000200 00000000
00000000 00000000 00000000
[ 0.000000] 1f103000 1f103fff 81003d48 00000200 00000000
00000000 00000000 00000000
[ 0.000000] 1e105300 1e1053ff 81007c64 00000200 00000000
00000000 00000000 00000000
[ 0.000000] ...
[ 0.000000] Call Trace:
[ 0.000000] [<80634b6c>] 0x80634b6c
[ 0.000000] [<803914dc>] 0x803914dc
[ 0.000000] [<80390c0c>] 0x80390c0c
[ 0.000000] [<80634bd4>] 0x80634bd4
[ 0.000000] [<80637fe0>] 0x80637fe0
[ 0.000000] [<806329b8>] 0x806329b8
[ 0.000000] [<80632380>] 0x80632380
[ 0.000000]
[ 0.000000] Code: 248463ac 8c420060 0000000f <7c42f000> 8c6322f0
3c048059 ac620060 24024000 00003825
[ 0.000000]
[ 0.000000] ---[ end trace 6daa6ea0f6bf3f22 ]---
[ 0.000000] Kernel panic - not syncing: Fatal exception
[ 0.000000] Rebooting in 1 seconds..
[ 0.000000] Reboot failed -- System halted
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Virenfrei.
www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
--- End Message ---
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
