El 5/7/20 a les 15:07, Luca Olivetti ha escrit:
El 5/7/20 a les 13:59, Luca Olivetti ha escrit: escrit:
I'm recompiling again in case I misplaced the section in my previous
test. In ~30-40 minutes it should be ready and I'll report back.
Success!
I probably did something wrong before.
I'm attaching the patch against 19.07.3 and my device, but I think the
same should be done for trunk and other devices with a similar dts.
Now it would be nice to also remove these harmless warnings ("supply
vusb_[da] not found" and "Mode Mismatch Interrupt"):
# dmesg | grep dwc2
[ 5.769881] dwc2 1e101000.usb: 1e101000.usb supply vusb_d not found,
using dummy regulator
[ 5.776840] dwc2 1e101000.usb: 1e101000.usb supply vusb_a not found,
using dummy regulator
[ 5.784970] dwc2 1e101000.usb: dwc2_core_reset() HANG! Soft Reset
GRSTCTL=80000001
[ 5.930874] dwc2 1e101000.usb: DWC OTG Controller
[ 5.934191] dwc2 1e101000.usb: new USB bus registered, assigned bus
number 1
[ 5.941041] dwc2 1e101000.usb: irq 62, io mem 0x1e101000
[ 239.438602] dwc2 1e101000.usb: Mode Mismatch Interrupt: currently in
Host mode
[ 239.444386] dwc2 1e101000.usb: Mode Mismatch Interrupt: currently in
Host mode
[ 239.638464] usb 1-1: new high-speed USB device number 2 using dwc2
[ 239.643522] dwc2 1e101000.usb: Mode Mismatch Interrupt: currently in
Host mode
[ 239.650233] dwc2 1e101000.usb: Mode Mismatch Interrupt: currently in
Host mode
but I'm happy enough that this is fixed now.
Any chance of having a working rtl8812au driver? ;-)
Bye
--
Luca
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
