Linksys E8350 is AC2350 (802.11ac Wave-2) router Device specifications: Architecture ARM (armv7l cortex-a15+neon vfpv4) Vendor Linksys Bootloader U-Boot System-On-Chip Qualcomm IPQ8064 @ 1.4 GHz CPU/Speed 2 x 1.4 GHz Flash-Chips SPI MX25U3235F + NAND MT29F1G08ABBDAH4 Flash sizes 4 MiB SPI + 128 MiB NAND RAM 512 MiB (491 MiB for the OS) Wireless 1 Qualcomm QCA9880 2.4GHz 802.11bgn Wireless 2 Quantenna QSR1000 5GHz 802.11ac ( driver not supported ) Ethernet 4 x 10/100/1000 Mbit/s w/ vlan support Switch Qualcomm Atheros QCA8337 USB 1 x 3.0 + 1 x 2.0(combo with eSata port) eSata 1 (combo with one of the USB ports) Serial Yes|Not populated JTAG Not populated
https://openwrt.org/inbox/toh/linksys/linksys_ea8350_1 Flashing instructions: * Upgrade with factory image via web interface Debricking: Get the original firmware: https://downloads.linksys.com/downloads/firmware/FW_E8350_1.0.03.003_20180929.bin 1. power off the device and disconnect the WAN port. (Only LAN port to be connected) 2. press & hold the “Reset” button 3. power on the deiece & wait for 10 seconds with pressed “Reset” button - the Router will open Firmware Recovery “http” server on IP: 192.168.1.1 4. set IP on your PC from 192.168.1.0/24 network ( Router is on IP 192.168.1.1 ) 5. open in browser URL: http://192.168.1.1/index.shtml MAC addresses: MAC address (as on device label) is stored in u-boot env WLAN uses address incremented by 1. Todor Colov (1): ipq806x: Add support for Linksys E8350-v1 .../ipq806x/base-files/etc/board.d/01_leds | 3 + .../ipq806x/base-files/etc/board.d/02_network | 1 + .../base-files/lib/upgrade/platform.sh | 3 +- .../arm/boot/dts/qcom-ipq8064-e8350-v1.dts | 246 ++++++++++++++++++ target/linux/ipq806x/image/Makefile | 29 +++ .../0069-arm-boot-add-dts-files.patch | 3 +- 6 files changed, 283 insertions(+), 2 deletions(-) create mode 100644 target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-e8350-v1.dts -- 2.27.0 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
