On Thu, Oct 22, 2020 at 02:36:51PM +0600, Roman Kuzmitskii wrote: > yeah, i found that it is broken too. > i tested on few octeon boards and all of them fall in ‘high memory device’ > category. > > reverting commit brings back the working tree back. > > i would suggest to revert for now and do better testing next time.
I don't really understand which commit broke your build: commit 2812ea3acb88c7e3649c912d6ad761bf8818fc51 (origin/master, origin/HEAD) Author: Petr Štetiar <[email protected]> Date: Thu Oct 22 11:49:07 2020 +0200 Revert "target: select procd-{ujail,seccomp} if !SMALL_FLASH" This reverts commit 6a56a6eb30799fcec9eecc3ee860dc4d8a5d952a as several users have reported unbootable systems. Ref: https://lists.openwrt.org/pipermail/openwrt-devel/2020-October/031838.html Suggested-by: Roman Kuzmitskii <[email protected]> Signed-off-by: Petr Štetiar <[email protected]> and did this fix it then? > > related log after flashing image with that commit: > > [ 18.661817] procd: Create service ubus > [ 18.665645] procd: Start instance ubus::instance1 > [ 18.670675] procd: Started instance ubus::instance1[614] > [ 18.676106] procd: running /etc/init.d/ubus running > [ 18.681303] procd: glob failed on /etc/init.d/ubus > [ 18.686204] procd: Instance ubus::instance1 exit with error code 65280 > after 0 seconds > [ 18.711471] procd: Connection to ubus failed > [ 18.815073] procd: Connection to ubus failed > [ 19.018736] procd: Connection to ubus failed > [ 19.422610] procd: Connection to ubus failed > [ 19.695516] procd: Started instance ubus::instance1[615] > [ 19.703165] procd: Instance ubus::instance1 exit with error code 65280 > after 0 seconds > [ 20.226890] procd: Connection to ubus failed > [ 20.711994] procd: Started instance ubus::instance1[616] > [ 20.719593] procd: Instance ubus::instance1 exit with error code 65280 > after 0 seconds > [ 21.231312] procd: Connection to ubus failed > [ 21.728430] procd: Started instance ubus::instance1[617] > [ 21.736023] procd: Instance ubus::instance1 exit with error code 65280 > after 0 seconds > [ 22.235724] procd: Connection to ubus failed > [ 22.744871] procd: Started instance ubus::instance1[618] > [ 22.752489] procd: Instance ubus::instance1 exit with error code 65280 > after 0 seconds > [ 23.240180] procd: Connection to ubus failed > [ 23.654955] procd: Ping > [ 23.760869] procd: Started instance ubus::instance1[619] > [ 23.768453] procd: Instance ubus::instance1 exit with error code 65280 > after 0 seconds > [ 24.245134] procd: Connection to ubus failed > [ 24.777303] procd: Started instance ubus::instance1[620] > [ 24.784902] procd: Instance ubus::instance1 exit with error code 65280 > after 0 seconds > [ 25.249421] procd: Connection to ubus failed > [ 25.794608] procd: Started instance ubus::instance1[621] > [ 25.802266] procd: Instance ubus::instance1 exit with error code 65280 > after 0 seconds > [ 26.253912] procd: Connection to ubus failed > [ 26.811123] procd: Started instance ubus::instance1[622] > [ 26.818762] procd: Instance ubus::instance1 exit with error code 65280 > after 0 seconds > [ 27.258402] procd: Connection to ubus failed > [ 27.828596] procd: Started instance ubus::instance1[623] > [ 27.836209] procd: Instance ubus::instance1 exit with error code 65280 > after 0 seconds > [ 28.262838] procd: Connection to ubus failed > [ 28.658590] procd: Ping > [ 28.844571] procd: Started instance ubus::instance1[624] > [ 28.852204] procd: Instance ubus::instance1 exit with error code 65280 > after 0 seconds > > also when you start a fresh built from initramfs - it boots bot gives lots of > segfaults: > > [ 37.210492] do_page_fault(): sending SIGSEGV to ujail for invalid read > access from 00000100f380dc81 > [ 37.219578] epc = 000000aaaaea42dc in ujail[aaaae9e000+11000] > [ 37.225349] ra = 000000aaaaea4840 in ujail[aaaae9e000+11000] > [ 42.235990] do_page_fault(): sending SIGSEGV to ujail for invalid read > access from 00000100f38a1c81 > [ 42.245090] epc = 000000aaaafd02dc in ujail[aaaafca000+11000] > [ 42.250865] ra = 000000aaaafd0840 in ujail[aaaafca000+11000] > [ 47.263899] do_page_fault(): sending SIGSEGV to ujail for invalid read > access from 00000100f3736c81 > [ 47.272998] epc = 000000aaaad5c2dc in ujail[aaaad56000+11000] > [ 47.278774] ra = 000000aaaad5c840 in ujail[aaaad56000+11000] > [ 52.291922] do_page_fault(): sending SIGSEGV to ujail for invalid read > access from 00000100f2f77c81 > [ 52.301033] epc = 000000aaab0682dc in ujail[aaab062000+11000] > [ 52.306805] ra = 000000aaab068840 in ujail[aaab062000+11000] > [ 54.313652] br-lan: port 1(eth0) entered blocking state > [ 54.318946] br-lan: port 1(eth0) entered disabled state > [ 54.324469] device eth0 entered promiscuous mode > [ 55.346609] eth0: 1000 Mbps Full duplex, port 0, queue 0 > [ 56.360423] br-lan: port 1(eth0) entered blocking state > [ 56.365667] br-lan: port 1(eth0) entered forwarding state > [ 56.371366] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready > [ 57.318164] do_page_fault(): sending SIGSEGV to ujail for invalid read > access from 00000100f3708c81 > [ 57.327255] epc = 000000aaaae922dc in ujail[aaaae8c000+11000] > [ 57.333021] ra = 000000aaaae92840 in ujail[aaaae8c000+11000] > [ 58.865884] do_page_fault(): sending SIGSEGV to ujail for invalid read > access from 00000100f3d9bc81 > [ 58.874966] epc = 000000aaab8432dc in ujail[aaab83d000+11000] > [ 58.880736] ra = 000000aaab843840 in ujail[aaab83d000+11000] > [ 59.365354] do_page_fault(): sending SIGSEGV to ujail for invalid read > access from 00000100f3797c81 > [ 59.374432] epc = 000000aaab6d82dc in ujail[aaab6d2000+11000] > [ 59.380222] ra = 000000aaab6d8840 in ujail[aaab6d2000+11000] > > > > > On Oct 22, 2020, at 2:15 PM, e9hack <[email protected]> wrote: > > > > Hi, > > > > after commit > > > > a2def3663a0feff12550906c33f9ecc3e5fb2a5d > > procd: jail: clean up capability handling and non-root ubusd > > > > system doesn't work properly. After sysupgrade, system does not restart > > completely and hangs somewhere in the boot process. I've to do a hard > > reset. After this, system does boot, but password is reset to no password. > > I don't know if other settings are reset too. ubusd is not started. uhttpd > > fails to start, because ubus socket isn't available. If I apply a > > previously saved backup with 'sysupgrade -r ...' and force a reboot, system > > starts, but tries to initialize a ext rootfs, which doesn't exist, and > > hangs in the boot process. At this point, I've to do a recovery via uboot. > > My router is a tp-link Archer C7. > > > > Regards, > > Hartmut > > > > _______________________________________________ > > openwrt-devel mailing list > > [email protected] > > https://lists.openwrt.org/mailman/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
