So it can be easily shared with other boards in the family and while at it add missing SPDX license identifiers into the DTS files.
Signed-off-by: Petr Štetiar <[email protected]> --- .../dts/rtl8382_d-link_dgs-1210-16.dts | 81 +----------------- .../rtl838x/dts/rtl8382_d-link_dgs-1210.dtsi | 84 +++++++++++++++++++ target/linux/rtl838x/image/Makefile | 14 ++-- 3 files changed, 94 insertions(+), 85 deletions(-) create mode 100644 target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210.dtsi diff --git a/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-16.dts b/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-16.dts index 3fb3cfb35346..3843af1371a7 100644 --- a/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-16.dts +++ b/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210-16.dts @@ -1,87 +1,10 @@ -#include "rtl838x.dtsi" +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> +#include "rtl8382_d-link_dgs-1210.dtsi" / { compatible = "d-link,dgs-1210-16", "realtek,rtl838x-soc"; model = "D-Link DGS-1210-16"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "green:power"; - gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gpio0 { - indirect-access-bus-id = <0>; -}; - -&spi0 { - status = "okay"; - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x00000000 0x80000>; - read-only; - }; - partition@80000 { - label = "u-boot-env"; - reg = <0x00080000 0x40000>; - read-only; - }; - partition@c0000 { - label = "u-boot-env2"; - reg = <0x000c0000 0x40000>; - read-only; - }; - partition@280000 { - label = "firmware"; - compatible = "denx,uimage"; - reg = <0x00100000 0xd80000>; - }; - partition@be80000 { - label = "kernel2"; - reg = <0x00e80000 0x180000>; - }; - partition@1000000 { - label = "sysinfo"; - reg = <0x01000000 0x40000>; - }; - partition@1040000 { - label = "rootfs2"; - reg = <0x01040000 0xc00000>; - }; - partition@1c40000 { - label = "jffs2"; - reg = <0x01c40000 0x3c0000>; - }; - }; - }; }; ðernet0 { diff --git a/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210.dtsi b/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210.dtsi new file mode 100644 index 000000000000..74043c097af8 --- /dev/null +++ b/target/linux/rtl838x/dts/rtl8382_d-link_dgs-1210.dtsi @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl838x.dtsi" + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "green:power"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio0 { + indirect-access-bus-id = <0>; +}; + +&spi0 { + status = "okay"; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x80000>; + read-only; + }; + partition@80000 { + label = "u-boot-env"; + reg = <0x00080000 0x40000>; + read-only; + }; + partition@c0000 { + label = "u-boot-env2"; + reg = <0x000c0000 0x40000>; + read-only; + }; + partition@280000 { + label = "firmware"; + compatible = "denx,uimage"; + reg = <0x00100000 0xd80000>; + }; + partition@be80000 { + label = "kernel2"; + reg = <0x00e80000 0x180000>; + }; + partition@1000000 { + label = "sysinfo"; + reg = <0x01000000 0x40000>; + }; + partition@1040000 { + label = "rootfs2"; + reg = <0x01040000 0xc00000>; + }; + partition@1c40000 { + label = "jffs2"; + reg = <0x01c40000 0x3c0000>; + }; + }; + }; +}; diff --git a/target/linux/rtl838x/image/Makefile b/target/linux/rtl838x/image/Makefile index f490fa7ffe92..448f0b472606 100644 --- a/target/linux/rtl838x/image/Makefile +++ b/target/linux/rtl838x/image/Makefile @@ -41,21 +41,23 @@ define Device/allnet_all-sg8208m endef TARGET_DEVICES += allnet_all-sg8208m -define Device/d-link_dgs-1210-16 +define Device/d-link_dgs-1210 SOC := rtl8382 IMAGE_SIZE := 13824k DEVICE_VENDOR := D-Link - DEVICE_MODEL := DGS-1210-16 DEVICE_PACKAGES := ip-full ip-bridge ethtool tc endef + +define Device/d-link_dgs-1210-16 + $(Device/d-link_dgs-1210) + DEVICE_MODEL := DGS-1210-16 +endef TARGET_DEVICES += d-link_dgs-1210-16 define Device/d-link_dgs-1210-10p - SOC := rtl8382 - IMAGE_SIZE := 13824k - DEVICE_VENDOR := D-Link + $(Device/d-link_dgs-1210) DEVICE_MODEL := DGS-1210-10P - DEVICE_PACKAGES := ip-full ip-bridge ethtool tc lua-rs232 + DEVICE_PACKAGES += lua-rs232 endef TARGET_DEVICES += d-link_dgs-1210-10p _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
