On 08/12/20 00:12, Andreas Böhler wrote:
Hey,
I added TP-Link RE200v1 device support a few months ago. Currently, the
snapshot builds are broken - they started to break about 4 weeks ago.
The system does not even boot, the last output on serial is "Starting
kernel ..." from U-Boot. The initramfs image works fine.
The interesting thing is: all my local builds run perfectly fine, from
RAM or from flash. If I sysupgrade to snapshot, even the snapshot build
boots and runs fine as long as the device is not unplugged for longer
than about a minute.
As I can't reproduce this behaviour with my build, I'm out of ideas. Can
someone give me an idea on what might cause this?
Thanks
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
maybe the build defaults for buildbot are broken.
You can enable that in the menu
Global build settings --->
and then select
Set build defaults for automatic builds (e.g. via buildbot)
I don't know exactly what other options are enabled by selecting it so
you probably need to check the source for what it actually does so you
can troubleshoot it.
-Alberto
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
