On 28/12/2020 15:27, Adrian Schmutzler wrote:
-----Original Message-----
From: openwrt-devel [mailto:[email protected]]
On Behalf Of Hannu Nyman
Sent: Montag, 28. Dezember 2020 10:12
To: OpenWrt Development List <[email protected]>
Cc: Petr Štetiar <[email protected]>; Christian Lamparter
<[email protected]>
Subject: Please revert 98b86296e6 as it breaks several ipq806x devices
https://github.com/openwrt/openwrt/commit/57e4cc8261ca6f0b32e4da6922a8f52ef82c4dc6
This is meant as an emergency measure (thus no "Fixes"), and should be properly
addressed at some point.
hmm, the R7800 must have some crazy bootargs-overrides when these
impact sysupgrade as well. Let's hope there isn't an issue with
the platform.sh + asrock.sh changes.
@hannu: can you please post your R7800's /proc/device-tree/chosen/ files (name
+ content)
for reference?
Cheers
Christian
Please revert commit 98b86296e6 "ipq806x: add support for ASRock G10" as
it breaks several popular ipq806x devices.
98b86296e6 adds a new kernel config symbol CONFIG_CMDLINE_OVERRIDE
for ipq806x and enables it for all ipq806x devices.
Based on forum discussion and my own experience, that new symbol
apparently changes the kernel command line and breaks several ipq806x
devices. Either the devices do not boot or there are other symptoms.
Symptoms in my own R7800:
* serial console is disabled. It works during u-boot but is silent after kernel
takes over (as console gets assigned to wrong tty)
* sysupgrade FROM builds with commit 98b86296e6 included does not work.
Debugging that is not feasible, as serial console is broken...
Bug report in:
https://bugs.openwrt.org/index.php?do=details&task_id=3540
and in
https://github.com/openwrt/openwrt/commit/98b86296e67dd2b467212fe1
a577656e6d3725da#commitcomment-45455875
Things get fixed by reverting the kernel symbol part from 98b86296e6:
|--- a/target/linux/ipq806x/config-5.4 +++
|b/target/linux/ipq806x/config-5.4
@@ -78,7 +78,7 @@ CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CLKDEV_LOOKUP=y CONFIG_CLKSRC_QCOM=y
CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE_OVERRIDE=y +#
CONFIG_CMDLINE_OVERRIDE is not set CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_QCOM=y CONFIG_COMPAT_32BIT_TIME=y|
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
