> -----Original Message----- > From: openwrt-devel [mailto:[email protected]] > On Behalf Of Mathias Kresin > Sent: Dienstag, 16. Februar 2021 19:35 > To: [email protected] > Subject: [PATCH] lantiq: ARV752DPW22: set the usb led trigger via devicetree > > Assign the usbdev trigger via devicetree and drop the userspace handling of > the usb leds > > Add the PCI attached usb controller as trigger sources for the usb led as > well.
Any chance to convert the other danube devices as well, so we get rid of all userspace usb LEDs here as well? Best Adrian > > Signed-off-by: Mathias Kresin <[email protected]> > --- > .../arch/mips/boot/dts/lantiq/danube.dtsi | 7 +++++ > .../lantiq/danube_arcadyan_arv752dpw22.dts | 28 > ++++++++++++++++++- > 2 files changed, 34 insertions(+), 1 deletion(-) > > diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube.dtsi > b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube.dtsi > index ced3e3bcb4..bb3e9fb188 100644 > --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube.dtsi > +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube.dtsi > @@ -254,6 +254,8 @@ > }; > > usb: usb@e101000 { > + #address-cells = <1>; > + #size-cells = <0>; > compatible = "lantiq,danube-usb"; > reg = <0xe101000 0x1000 > 0xe120000 0x3f000>; > @@ -263,6 +265,11 @@ > phys = <&usb_phy>; > phy-names = "usb2-phy"; > status = "disabled"; > + > + ehci_port1: port@1 { > + reg = <1>; > + #trigger-source-cells = <0>; > + }; > }; > > deu@e103100 { > diff --git > a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv > 752dpw22.dts > b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv > 752dpw22.dts > index 72483e4749..00ac016a42 100644 > --- > a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv > 752dpw22.dts > +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadya > +++ n_arv752dpw22.dts > @@ -17,7 +17,6 @@ > led-upgrade = &power_red; > > led-dsl = &internet_red; > - led-usb = &umts; > led-wifi = &wifi; > }; > > @@ -78,6 +77,9 @@ > umts: umts { > label = "red:umts"; > gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>; > + trigger-sources = <&ehci_port1>, > + <&ehci_port2>, <&uhci_port2>; > + linux,default-trigger = "usbport"; > }; > wifi: wifi { > label = "red:wifi"; > @@ -242,6 +244,30 @@ > ralink,mtd-eeprom-swap; > mtd-mac-address = <&boardconfig 0x16>; > }; > + > + usb@0f,0 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "pci1106,3038"; > + reg = <0x7800 0 0 0 0>; /* 0000:00:0f.0: UHCI Host Controller > */ > + > + uhci_port2: port@2 { > + reg = <2>; > + #trigger-source-cells = <0>; > + }; > + }; > + > + usb@0f,2 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "pci1106,3038"; > + reg = <0x7a00 0 0 0 0>; /* 0000:00:0f.2: EHCI Host Controller*/ > + > + ehci_port2: port@2 { > + reg = <2>; > + #trigger-source-cells = <0>; > + }; > + }; > }; > > &usb_phy { > -- > 2.25.1 > > > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/mailman/listinfo/openwrt-devel
openpgp-digital-signature.asc
Description: PGP signature
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
