Hi, Sander Vanheule <[email protected]> schreef op 20 februari 2021 14:45:26 CET: >The Netgear R6800 and R6700v2 devices have a Semtech SX1503 GPIO >expander controlling the device LEDs. This expander was initially >supported on 4.14, but support was lost in the transition to 5.4. > >Since this driver cannot be built as a kernel module, enable it in the >kernel config for all mt7621 devices. > >Run-tested on a Netgear R6800.
Works fine here too. > >Cc: Stijn Segers <[email protected]> >Cc: Hauke Mehrtens <[email protected]> >Signed-off-by: Sander Vanheule <[email protected]> Tested-by: Stijn Segers <[email protected]> >--- > target/linux/ramips/mt7621/config-5.4 | 1 + > 1 file changed, 1 insertion(+) > >diff --git a/target/linux/ramips/mt7621/config-5.4 >b/target/linux/ramips/mt7621/config-5.4 >index fba22a39cf..057c782760 100644 >--- a/target/linux/ramips/mt7621/config-5.4 >+++ b/target/linux/ramips/mt7621/config-5.4 >@@ -210,6 +210,7 @@ CONFIG_PHYLINK=y > CONFIG_PINCTRL=y > CONFIG_PINCTRL_RT2880=y > # CONFIG_PINCTRL_SINGLE is not set >+CONFIG_PINCTRL_SX150X=y > CONFIG_POWER_RESET=y > CONFIG_POWER_RESET_GPIO=y > CONFIG_POWER_SUPPLY=y -- Verstuurd vanaf mijn Android apparaat met K-9 Mail. Excuseer mijn beknoptheid. _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
