Indeed, this fixes a stupid typo that prevents the IRQ to be correctly
configured.
Please apply.
Birger
On 09/03/2021 22:12, Bjørn Mork wrote:
This bug was the root cause for the failing sfp driver.
Signed-off-by: Bjørn Mork <[email protected]>
---
.../realtek/files-5.4/drivers/net/dsa/rtl83xx/common.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/common.c
b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/common.c
index 698f2892ea1e..197a96f8ad13 100644
--- a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/common.c
+++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/common.c
@@ -555,7 +555,6 @@ static int __init rtl83xx_sw_probe(struct platform_device
*pdev)
int err = 0, i;
struct rtl838x_switch_priv *priv;
struct device *dev = &pdev->dev;
- u64 irq_mask;
u64 bpdu_mask;
pr_debug("Probing RTL838X switch device\n");
@@ -650,9 +649,9 @@ static int __init rtl83xx_sw_probe(struct platform_device
*pdev)
/* Enable link and media change interrupts. Are the SERDES masks needed? */
sw_w32_mask(0, 3, priv->r->isr_glb_src);
-
- priv->r->set_port_reg_le(irq_mask, priv->r->isr_port_link_sts_chg);
- priv->r->set_port_reg_le(irq_mask, priv->r->imr_port_link_sts_chg);
+
+ priv->r->set_port_reg_le(priv->irq_mask,
priv->r->isr_port_link_sts_chg);
+ priv->r->set_port_reg_le(priv->irq_mask,
priv->r->imr_port_link_sts_chg);
priv->link_state_irq = platform_get_irq(pdev, 0);
pr_info("LINK state irq: %d\n", priv->link_state_irq);
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
