The purpose of this code seems to be to avoid issues caused by partially overwriting an existing UBI partition, where some of the erase counters would be reset but not the unmodified ones. This problem has been solved in a more generic way by the UBI EOF marker. This ensures that any old PEBs after the marker are properly initialized. It is therefore unnecessary to erase the whole partition before flashing a new OpenWrt factory image.
Signed-off-by: Bjørn Mork <[email protected]> --- .../ipq806x/base-files/lib/upgrade/linksys.sh | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-) diff --git a/target/linux/ipq806x/base-files/lib/upgrade/linksys.sh b/target/linux/ipq806x/base-files/lib/upgrade/linksys.sh index 22771278ce1a..29f476345118 100644 --- a/target/linux/ipq806x/base-files/lib/upgrade/linksys.sh +++ b/target/linux/ipq806x/base-files/lib/upgrade/linksys.sh @@ -44,10 +44,6 @@ linksys_get_target_firmware() { esac } -linksys_get_root_magic() { - (get_image "$@" | dd skip=786432 bs=4 count=1 | hexdump -v -n 4 -e '1/1 "%02x"') 2>/dev/null -} - platform_do_upgrade_linksys() { local magic_long="$(get_magic_long "$1")" @@ -101,18 +97,6 @@ platform_do_upgrade_linksys() { nand_upgrade_tar "$1" } [ "$magic_long" = "27051956" ] && { - # check firmwares' rootfs types - local oldroot="$(linksys_get_root_magic $target_mtd)" - local newroot="$(linksys_get_root_magic "$1")" - - if [ "$newroot" = "55424923" -a "$oldroot" = "55424923" ] - # we're upgrading from a firmware with UBI to one with UBI - then - # erase everything to be safe - mtd erase $part_label - get_image "$1" | mtd -n write - $part_label - else - get_image "$1" | mtd write - $part_label - fi + get_image "$1" | mtd write - $part_label } } -- 2.20.1 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
