On 2021-03-26 09:42, Felix Fietkau wrote:
On 2021-03-26 09:34, Martin Schiller wrote:
On 2020-07-24 19:13, Felix Fietkau wrote:
On 2020-07-24 18:44, Jo-Philipp Wich wrote:
Hi Felix,
[...]
For a simple default config, you could have this:
# network
config device
option type bridge # I assume this is needed as well
option name switch0
Correct.
config bridge-vlan
option vlan 1
option ports "lan1 lan2 lan3 lan4"
config interface lan
option ifname switch0.1
# wireless
config wifi-iface
option network lan
In this case, wlan0 would be added to switch0 and set to VLAN 1
untagged
by default.
If you want it on VLAN 10 tagged/PVID instead, you could do:
option network-vlan "10:t*"
What do you think?
I did think about it some more, also in context of a LuCI
implementation and
the special role of wifi and I am convinced now that this approach
generally
makes sense.
However for the vlan I wonder if we should simply use "option vid
10"
since
setting anything besides an egress untagged pvid does not make sense
for wifi.
I think more complex VLAN settings make sense for WDS if you want to
carry multiple networks over the link.
So your second example above would become:
config wifi-iface
option network lan
option vid 10 # instead of inheriting vid 1, use 10 as pvid
Also, just to clarify... assuming a:
config interface foo
option ifname somevlanbridge0.456
and an wifi iface without an explicit vid override:
config wifi-iface
option network foo
... we would inherit vid 456 and set as pvid, right? Or are we are
always
going to default to 1?
It would inherit 456 to keep it in sync with the VLAN based network.
Is this functionality already integrated?
I am testing with a xrx200 based system with the DSA mainline driver
and
a wifi interface and have the problem that the wlan0 interface is
added
to the bridge switch0 but the bridge vlan configuration for the wlan0
interface is not set.
It's handled differently now.
You can set lan's ifname to switch0.1 (without option type bridge) and
use 'option network lan' in the wifi-iface. It will detect that the lan
ifname is a vlan on top of a vlan-filtering bridge and will add wlan0
to
switch0 and make it a member of lan's vlan.
Hmmm... I think that's what I've alread done. Here is my config:
network:
---------
config interface 'lan'
option proto 'static'
option ipaddr '192.168.X.Y'
option netmask '255.255.255.0'
option ifname 'switch0.1'
config device
option type 'bridge'
option name 'switch0'
list ifname 'lan1'
list ifname 'lan2'
list ifname 'lan3'
list ifname 'lan4'
config bridge-vlan
option device 'switch0'
option vlan '1'
list ports 'lan1:u*'
list ports 'lan2:u*'
list ports 'lan3:u*'
list ports 'lan4:u*'
wireless:
----------
config wifi-iface 'default_radio0'
option device 'radio0'
option mode 'ap'
option encryption 'psk2'
option ssid 'TETS-AP'
option network 'lan'
option key 'xxxxxxxxxxxxxxxxxxxxxxx'
option wpa_disable_eapol_key_retries '1'
Did I forget anything?
- Martin
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
