Some devices are assigned globally unique MAC addresses for all
ports. These are stored by U-Boot in the second U-Boot enviroment
("sysinfo") as a range of start and end address.Use the full range if provided. Signed-off-by: Bjørn Mork <[email protected]> --- target/linux/realtek/base-files/etc/board.d/02_network | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/target/linux/realtek/base-files/etc/board.d/02_network b/target/linux/realtek/base-files/etc/board.d/02_network index 06293174b0df..f4daeed93d86 100644 --- a/target/linux/realtek/base-files/etc/board.d/02_network +++ b/target/linux/realtek/base-files/etc/board.d/02_network @@ -22,11 +22,14 @@ ucidef_set_bridge_device switch ucidef_set_interface_lan "$lan_list" lan_mac="" +lan_mac_end="" label_mac="" case $board in *) - lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) - label_mac=$lan_mac + lan_mac=$(mtd_get_mac_ascii u-boot-env2 mac_start) + lan_mac_end=$(mtd_get_mac_ascii u-boot-env2 mac_end) + label_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) + [ -z "$lan_mac" ] && lan_mac=$label_mac ;; esac @@ -35,7 +38,7 @@ ucidef_set_bridge_mac "$lan_mac" ucidef_set_network_device_mac eth0 $lan_mac for lan in $lan_list; do ucidef_set_network_device_mac $lan $lan_mac - lan_mac=$(macaddr_setbit_la $lan_mac) + [ -z "$lan_mac_end" ] || [ "$lan_mac" == "$lan_mac_end" ] && lan_mac=$(macaddr_setbit_la $lan_mac) lan_mac=$(macaddr_add $lan_mac 1) done [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac -- 2.20.1 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
