Hello everyone, OpenWrt 21.02 adds support for the TP-Link AD7200,[1][2] but in practice I have not been able to install it. When I try uploading any of the three images (uImage, factory, sysupgrade) through the web interface, it just says "Firmware file error."
I also tried setting my computer's IP address to 192.168.0.66, making the image available over TFTP with the name AD7200_1.0_tp_recovery.bin, and booting up the router with the reset button held down. I had Wireshark open and watched the file being transferred, but when the transfer was complete, the router just rebooted into its stock firmware again. So, what is the correct procedure for installing OpenWrt on the AD7200? -Alex [1] https://git.openwrt.org/?p=openwrt%2Fopenwrt.git&a=search&h=HEAD&st=commit&s=ad7200 [2] https://downloads.openwrt.org/releases/21.02-SNAPSHOT/targets/ipq806x/generic/ _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
