The ZyXEL LTE3301-Plus is an 4G indoor CPE with 2 external LTE antennas.
Specifications:
- SoC: MediaTek MT7621AT
- RAM: 256 MB
- Flash: 128 MB MB NAND (MX30LF1G18AC)
- WiFi: MediaTek MT7615E
- Switch: 4 LAN ports (Gigabit)
- LTE: Quectel EG506 connected by USB3 to SoC
- SIM: 1 micro-SIM slot
- USB: USB3 port
- Buttons: Reset, WPS
- LEDs: Multicolour power, internet, LTE, signal, Wifi, USB
- Power: 12V, 1.5A
The device is built as an indoor ethernet to LTE bridge or router with Wifi.
UART Serial:
57600N1
Located on populated 5 pin header J5:
[o] GND
[ ] key - no pin
[o] 3.3V Vcc
[o] RX
[o] TX
MAC assignment:
lan: 98:0d:67:ee:85:54 (base, on the device back)
wlan: 98:0d:67:ee:85:55
For more details about flashing see commit
2449a632084b29632605e5a79ce5d73028eb15dd .
Signed-off-by: André Valentin <avalen...@marcant.net>
---
package/boot/uboot-envtools/files/ramips | 1 +
.../ramips/dts/mt7621_zyxel_lte3301-plus.dts | 213 ++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 19 ++
.../mt7621/base-files/etc/board.d/01_leds | 3 +
.../mt7621/base-files/etc/board.d/02_network | 3 +-
.../base-files/etc/board.d/03_gpio_switches | 4 +
.../mt7621/base-files/etc/init.d/bootcount | 1 +
.../mt7621/base-files/lib/upgrade/platform.sh | 1 +
8 files changed, 244 insertions(+), 1 deletion(-)
create mode 100644 target/linux/ramips/dts/mt7621_zyxel_lte3301-plus.dts
diff --git a/package/boot/uboot-envtools/files/ramips
b/package/boot/uboot-envtools/files/ramips
index bce2e5f0fb..4d0e608911 100644
--- a/package/boot/uboot-envtools/files/ramips
+++ b/package/boot/uboot-envtools/files/ramips
@@ -53,6 +53,7 @@ xiaomi,mi-router-ac2100|\
xiaomi,redmi-router-ac2100)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000"
;;
+zyxel,lte3301-plus|\
zyxel,nr7101)
idx="$(find_mtd_index Config)"
[ -n "$idx" ] && \
diff --git a/target/linux/ramips/dts/mt7621_zyxel_lte3301-plus.dts
b/target/linux/ramips/dts/mt7621_zyxel_lte3301-plus.dts
new file mode 100644
index 0000000000..af2e792cb8
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_zyxel_lte3301-plus.dts
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "zyxel,lte3301-plus", "mediatek,mt7621-soc";
+ model = "ZyXEL LTE3301-PLUS";
+
+ aliases {
+ label-mac-device = &gmac0;
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+
+ lte_power {
+ gpio-export,name = "lte_power";
+ gpio-export,output = <1>;
+ gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ };
+
+ usb_power {
+ gpio-export,name = "usb_power";
+ gpio-export,output = <1>;
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "white:power";
+ gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ wifi {
+ label = "white:wifi";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ internet {
+ label = "white:internet";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "white:usb";
+ gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
+ linux,default-trigger = "usbport";
+ };
+
+ lte {
+ label = "white:lte";
+ gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+ };
+
+ mobile_green {
+ label = "green:mobile";
+ gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
+ };
+
+ mobile_orange {
+ label = "orange:mobile";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+
+ mobile_red {
+ label = "red:mobile";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* There is blank space between the partitions, this has been
+ adopted from the manufacturer.
+ */
+ partition@0 {
+ label = "Bootloader";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "Config";
+ reg = <0x80000 0x80000>;
+ };
+
+ factory: partition@100000 {
+ label = "Factory";
+ reg = <0x100000 0x40000>;
+ read-only;
+ };
+
+ partition@140000 {
+ label = "Kernel";
+ reg = <0x140000 0x1ec0000>;
+ };
+
+ partition@540000 {
+ label = "ubi";
+ reg = <0x540000 0x1ac0000>;
+ };
+
+ partition@2140000 {
+ label = "Kernel2";
+ reg = <0x2140000 0x1ec0000>;
+ };
+
+ partition@4000000 {
+ label = "wwan";
+ reg = <0x4000000 0x100000>;
+ };
+
+ partition@4100000 {
+ label = "data";
+ reg = <0x4100000 0x1000000>;
+ };
+
+ partition@5100000 {
+ label = "rom-d";
+ reg = <0x5100000 0x100000>;
+ read-only;
+ };
+
+ partition@5200000 {
+ label = "reserve";
+ reg = <0x5200000 0x80000>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+};
+
+&pcie0 {
+ status = "okay";
+
+ mt7615d@1,0 {
+ compatible = "pci14c3,7615";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,firmware-eeprom = "mt7615e_eeprom.bin";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ mtd-mac-address = <&factory 0xfe6e>;
+ mtd-mac-address-increment = <1>;
+ };
+};
+
+&gmac0 {
+ mtd-mac-address = <&factory 0xfe6e>;
+};
+
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "lan4";
+ };
+ port@1 {
+ status = "okay";
+ label = "lan3";
+ };
+ port@2 {
+ status = "okay";
+ label = "lan2";
+ };
+ port@3 {
+ status = "okay";
+ label = "lan1";
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "wdt", "uart3", "rgmii2", "jtag";
+ function = "gpio";
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk
b/target/linux/ramips/image/mt7621.mk
index 48448c2ab1..138a3213cb 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -1511,6 +1511,25 @@ define Device/zio_freezio
endef
TARGET_DEVICES += zio_freezio
+define Device/zyxel_lte3301-plus
+ $(Device/dsa-migration)
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ UBINIZE_OPTS := -E 5
+ DEVICE_VENDOR := ZyXEL
+ DEVICE_MODEL := LTE3301-PLUS
+ DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3 \
+ uboot-envtools kmod-usb-ledtrig-usbport kmod-usb-net-qmi-wwan \
+ kmod-usb-serial-option uqmi
+ KERNEL := $(KERNEL_DTB) | uImage lzma | \
+ zytrx-header $$(DEVICE_MODEL) $$(VERSION_DIST)-$$(REVISION)
+ KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma | \
+ zytrx-header $$(DEVICE_MODEL) 9.99(ABQU.1)$$(VERSION_DIST)-recovery
+ KERNEL_INITRAMFS_SUFFIX := -recovery.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += zyxel_lte3301-plus
+
define Device/zyxel_nr7101
$(Device/dsa-migration)
BLOCKSIZE := 128k
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
index 6743b7e6c3..f83ff797f2 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -98,6 +98,9 @@ xiaomi,redmi-router-ac2100)
youhua,wr1200js)
ucidef_set_led_netdev "internet" "INTERNET" "green:wan" "wan"
;;
+zyxel,lte3301-plus)
+ ucidef_set_led_netdev "internet" "internet" "white:internet" "wwan0"
+ ;;
esac
board_config_flush
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index cde3cba9bc..aae06ea588 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -45,7 +45,8 @@ ramips_setup_interfaces()
ucidef_set_interface_lan "lan1 lan2"
;;
linksys,re6500|\
- netgear,wac104)
+ netgear,wac104|\
+ zyxel,lte3301-plus)
ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
;;
mikrotik,routerboard-750gr3)
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches
b/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches
index ed728b07c4..4bf2aa37e0 100644
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches
@@ -22,6 +22,10 @@ ubnt,edgerouter-x-sfp)
ucidef_add_gpio_switch "poe_power_port3" "PoE Power Port3" "403"
ucidef_add_gpio_switch "poe_power_port4" "PoE Power Port4" "404"
;;
+zyxel,lte3301-plus)
+ ucidef_add_gpio_switch "usb_power" "Power USB Port" "usb_power" "1"
+ ucidef_add_gpio_switch "lte_power" "Power LTE modem" "lte_power" "1"
+ ;;
zyxel,nr7101)
ucidef_add_gpio_switch "lte_reset" "Reset LTE/5G modem" "483"
;;
diff --git a/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount
b/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount
index a155458d3f..03c6d8eea7 100755
--- a/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount
+++ b/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount
@@ -16,6 +16,7 @@ boot() {
samknows,whitebox-v8)
fw_setenv bootcount 0
;;
+ zyxel,lte3301-plus|\
zyxel,nr7101)
[ $(printf %d $(fw_printenv -n DebugFlag)) -gt 0 ] || fw_setenv
DebugFlag 0x1
[ $(printf %d $(fw_printenv -n Image1Stable)) -gt 0 ] ||
fw_setenv Image1Stable 1
diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
index d30bc3db2e..0cf6abfb0a 100755
--- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
@@ -82,6 +82,7 @@ platform_do_upgrade() {
ubnt,edgerouter-x-sfp)
platform_upgrade_ubnt_erx "$1"
;;
+ zyxel,lte3301-plus|\
zyxel,nr7101)
fw_setenv CheckBypass 0
fw_setenv Image1Stable 0
--
2.20.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
