On Fri, 18 Jun 2021, Nathan Lutchansky wrote:
2.4Ghz and 5Ghz radios work more or less okay. The only issues I've encountered are reminiscent of my experience with the EAP235-Wall (lack of DFS; timeouts after repeated configuration changes, particularly when unsupported frequencies are selected) so I'm pretty sure they're mt76 issues rather than anything specific to this board. Once a supported configuration is up and running, it's been solid.
After a little more testing I suspect I'm running into FS#3873. I can work around it by setting up the desired /etc/config/wireless, then shutting down and doing a cold power cycle. (Rebooting is not sufficient.) Once it comes up, it's stable, as long as I don't touch the 5Ghz configuration again.
I'll do more testing early next week with both the Archer A6 v3 and the EAP235-Wall to see if I can add more useful information to the issue tracker. -Nathan
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
