Adapt the preinit_config_board() to the board.json network changes. It
now looks for the device and the ports variables to configure the LAN
network.
This works with swconfig configurations.
Fixes: FS#3866
Fixes: d42640e389a8 ("base-files: use "ports" array in board.json network for
bridges")
Signed-off-by: Hauke Mehrtens <[email protected]>
---
.../base-files/files/lib/preinit/10_indicate_preinit | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/package/base-files/files/lib/preinit/10_indicate_preinit
b/package/base-files/files/lib/preinit/10_indicate_preinit
index 3c5992979016..56e96c63baab 100644
--- a/package/base-files/files/lib/preinit/10_indicate_preinit
+++ b/package/base-files/files/lib/preinit/10_indicate_preinit
@@ -72,14 +72,20 @@ preinit_config_board() {
json_select network
json_select "lan"
- json_get_vars ifname
+ json_get_vars device
+ json_get_values ports ports
json_select ..
json_select ..
- [ -n "$ifname" ] || return
+ [ -n "$device" -o -n "$ports" ] || return
+
+ # swconfig uses $device and DSA uses ports
+ [ -z "$ports" ] && {
+ ports="$device"
+ }
# only use the first one
- ifname=${ifname%% *}
+ ifname=${ports%% *}
if [ -x /sbin/swconfig ]; then
# configure the switch, if present
--
2.30.2
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
