The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.

To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
--- Begin Message ---
On 24.07.2021 20:42, Hauke Mehrtens wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> content is safe
> 
> On 7/16/21 7:08 AM, Claudiu Beznea wrote:
>> Add pioBU label to secumod. Along with this set gpio controller
>> properties for secumod.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.bez...@microchip.com>
>> ---
>>   .../linux/at91/patches-5.4/104-add-piobu.patch   | 16 ++++++++++++++++
>>   1 file changed, 16 insertions(+)
>>   create mode 100644 target/linux/at91/patches-5.4/104-add-piobu.patch
>>
>> diff --git a/target/linux/at91/patches-5.4/104-add-piobu.patch
>> b/target/linux/at91/patches-5.4/104-add-piobu.patch
>> new file mode 100644
>> index 000000000000..2495fe4635a1
>> --- /dev/null
>> +++ b/target/linux/at91/patches-5.4/104-add-piobu.patch
> 
> Please take this patch from upstream with the comments in it:
> https://git.kernel.org/linus/4514a7c81234673a764c59e59a0c34c1921f093b

Hi Hauke,

Thank you for your review. I am new to this mailing list thus I wasn't sure
the best approach for back-porting patches. So, in case the patches are
already published to official open source repositories (like Linux kernel)
is it OK to just get the patches with all the comments and tags and place
them in the proper directory, right (this is what I understand from your
reply)? Up to this moment I wasn't sure about this and I was inclined to
follow the procedure at [1] (which is found complicated for back-porting).

Thank you,
Claudiu Beznea

[1]
https://openwrt.org/docs/guide-developer/build-system/use-patches-with-buildsystem

> 
>> @@ -0,0 +1,16 @@
>> +--- a/arch/arm/boot/dts/sama5d2.dtsi
>> ++++ b/arch/arm/boot/dts/sama5d2.dtsi
>> +@@ -885,9 +885,12 @@
>> +                             clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
>> +                     };
>> +
>> +-                    secumod@fc040000 {
>> ++                    pioBU: secumod@fc040000 {
>> +                             compatible = "atmel,sama5d2-secumod",
>> "syscon";
>> +                             reg = <0xfc040000 0x100>;
>> ++
>> ++                            gpio-controller;
>> ++                            #gpio-cells = <2>;
>> +                     };
>> +
>> +                     tdes@fc044000 {
>>
> 



--- End Message ---
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Reply via email to