On Fri, 2021-08-27 at 11:38 +0200, Sander Vanheule wrote: > Starting with v3 of the vendor firmware for the TP-Link EAP235-Wall v1, > downgrades to firmware versions below v3 as not allowed. Since OpenWrt > uses version 0.0.0 as a default, this causes the factory install to fail > on devices with a recent firmware. This failure is associated by the > following message on the device's serial console: > > EAP235/230-Wall forbid fw reverted from 3.x.x to lower version! > > Vendor firmware (v3) also uses build and release numbers to compare > images, so identical version numbers are very unlikely to cause issues. > Bump the firmware version to 3.0.0 to ensure users can install OpenWrt > on their devices. > > Signed-off-by: Sander Vanheule <[email protected]>
With permission to add these: Reported-by: Colton Conor <[email protected]> Tested-by: Colton Conor <[email protected]> > --- > tools/firmware-utils/src/tplink-safeloader.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/tools/firmware-utils/src/tplink-safeloader.c > b/tools/firmware-utils/src/tplink- > safeloader.c > index 9349173e59..0b3ec41d3c 100644 > --- a/tools/firmware-utils/src/tplink-safeloader.c > +++ b/tools/firmware-utils/src/tplink-safeloader.c > @@ -1560,7 +1560,7 @@ static struct device_info boards[] = { > "SupportList:\r\n" > "EAP235-Wall(TP-Link|UN|AC1200-D):1.0\r\n", > .part_trail = PART_TRAIL_NONE, > - .soft_ver = SOFT_VER_DEFAULT, > + .soft_ver = SOFT_VER_NUMERIC(3, 0, 0), > .soft_ver_compat_level = 1, > > .partitions = { _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
