> On 4 Nov 2021, at 10:25, Rafał Miłecki <[email protected]> wrote: > > On 04.11.2021 07:52, Rafał Miłecki wrote: >>> On 25.10.2021 23:37, Arınç ÜNAL wrote: >>> @@ -8,6 +8,12 @@ netgear,r8000) >>> ucidef_set_led_usbport "usb2" "USB 2.0" "bcm53xx:white:usb2" >>> "usb1-port2" "usb2-port2" >>> ucidef_set_led_usbport "usb3" "USB 3.0" "bcm53xx:white:usb3" >>> "usb1-port1" "usb2-port1" "usb4-port1" >>> ;; >>> +asus,rt-ac88u) >>> + ucidef_set_led_default "power" "Power" "white:power" "1" >> Do we need that? "power" led seems to be enabled by default by DTS code: >> linux,default-trigger = "default-on"; >>> + ucidef_set_led_netdev "lan" "LAN" "white:lan" "eth1" >> This info should be put in DT but we don't have bindings for that yet. > > Actually it seems "trigger-sources" can be used with Ethernet interfaces > as well. So I think what you need is to: > > 1. Add #trigger-source-cells = <0>; to ethernet@ nodes > 2. Add trigger-sources = <&gmac0>; (or another gmac) to the LED node > 3. Read trigger-sources in the ledtrig-netdev.c > > For a refernece check drivers/usb/core/ledtrig-usbport.c
I’ll see what I can so. _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
