From: Oleksandr Hnatiuk <[email protected]>
Signed-off-by: Oleksandr Hnatiuk <[email protected]>
Changes in this version:
- my DTS actually compiles, because of:
- fixed typos
- removed "ALL" partition
- removed `&ref` that doesn't reference anything
- renamed file so that it matches what the build
system is looking for when selecting this board
---
Now I get the following error:
```
/media/hdd/openwrt/staging_dir/host/bin/padjffs2
/media/hdd/openwrt/build_dir/target-mips_24kc_musl/linux-ath79_generic/tmp/openwrt-ath79-generic-qca_apjet01-16m-squashfs-factory.bin
64
padding image to 004b0000
WARNING: Image file
/media/hdd/openwrt/build_dir/target-mips_24kc_musl/linux-ath79_generic/tmp/openwrt-ath79-generic-qca_apjet01-16m-squashfs-factory.bin
is too big: 4915204 > 0
dd
if=/media/hdd/openwrt/build_dir/target-mips_24kc_musl/linux-ath79_generic/tmp/openwrt-ath79-generic-qca_apjet01-16m-squashfs-factory.bin
of=/media/hdd/openwrt/build_dir/target-mips_24kc_musl/linux-ath79_generic/tmp/openwrt-ath79-generic-qca_apjet01-16m-squashfs-factory.bin.new
bs=14528k conv=sync
dd: failed to open
'/media/hdd/openwrt/build_dir/target-mips_24kc_musl/linux-ath79_generic/tmp/openwrt-ath79-generic-qca_apjet01-16m-squashfs-factory.bin':
No such file or directory
make[4]: *** [Makefile:101:
/media/hdd/openwrt/build_dir/target-mips_24kc_musl/linux-ath79_generic/tmp/openwrt-ath79-generic-qca_apjet01-16m-squashfs-factory.bin]
Error 1
make[4]: Leaving directory '/media/hdd/openwrt/target/linux/ath79/image'
```
Not sure why it says zero in '4915204 > 0'. Previous `dd` commands
completed just fine.
diff --git a/target/linux/ath79/dts/qcn5502_qca_apjet01-16m.dts
b/target/linux/ath79/dts/qcn5502_qca_apjet01-16m.dts
new file mode 100644
index 0000000000..8947ba9980
--- /dev/null
+++ b/target/linux/ath79/dts/qcn5502_qca_apjet01-16m.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca956x.dtsi"
+
+/ {
+ compatible = "asus,rt-ac59u", "qca,qcn5502", "qca,qca9560";
+ model = "ASUS RT-AC59U";
+
+ aliases {
+ serial0 = &uart;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,mips74Kc";
+ clocks = <&pll ATH79_CLK_CPU>;
+ reg = <0>;
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "apjet01:green:wlan";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "apjet01:green:usb";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ lan@1 {
+ label = "apjet01:green:lan";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ lan@2 {
+ label = "apjet01:green:lan";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ lan@3 {
+ label = "apjet01:green:lan";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ lan@4 {
+ label = "apjet01:green:lan";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@0 {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ button@1 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "winbond,w25q128", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ };
+
+ partition@040000 {
+ label = "nvram";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@050000 {
+ label = "factory";
+ reg = <0x050000 0x010000>;
+ };
+
+ partition@060000 {
+ label = "linux";
+ reg = <0x060000 0xf20000>;
+ };
+
+ partition@19ab80 {
+ label = "rootfs";
+ reg = <0x19ab80 0xde5480>;
+ };
+
+ partition@f80000 {
+ label = "jffs2";
+ reg = <0xf80000 0x080000>;
+ };
+ };
+ };
+};
diff --git a/target/linux/ath79/image/generic.mk
b/target/linux/ath79/image/generic.mk
index 9d0be2b86b..2b571a61d8 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -1963,6 +1963,30 @@ define Device/qca_ap143-16m
endef
TARGET_DEVICES += qca_ap143-16m
+define Device/qca_apjet01
+ SOC := qcn5502
+ DEVICE_VENDOR := Qualcomm Atheros
+ DEVICE_MODEL := APJET01
+ DEVICE_PACKAGES := kmod-usb2
+ SUPPORTED_DEVICES += apjet01
+ LOADER_TYPE := bin
+ KERNEL := kernel-bin | append-dtb | lzma -d20 | uImage lzma
+ COMPILE := loader-$(1).bin loader-$(1).uImage
+ COMPILE/loader-$(1).bin := loader-okli-compile
+ COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | lzma | \
+ uImage lzma
+endef
+
+define Device/qca_apjet01-16m
+ $(Device/qca_apjet01)
+ DEVICE_VARIANT := (16M)
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | check-size | pad-to 14528k | \
+ append-loader-okli-uimage $(1) | pad-to 64k
+endef
+TARGET_DEVICES += qca_apjet01-16m
+
define Device/qihoo_c301
$(Device/seama)
SOC := ar9344
--
2.30.2
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
