The RTL8231 driver is currently not setting the maximum number of GPIOs correctly, so this needs to be fixed. [1/4]
While we're at it, add some other small improvements to the driver: - Use automatic gpio base numbering [2/4] - Require the SMI bus ID to be specified in the devicetree [3/4] - Verify chip presence when probing, and fail if it cannot be found [4/4] Main changes since v1: - Add chip detection patch These patches were tested on my GS110TPP. Sander Vanheule (4): realtek: fix RTL8231 gpio count realtek: use automatic GPIO numbering for RTL8231 realtek: always require SMI bus ID for RTL8231 realtek: add RTL8231 chip detection .../files-5.10/drivers/gpio/gpio-rtl8231.c | 52 ++++++++++++------- 1 file changed, 32 insertions(+), 20 deletions(-) -- 2.33.1 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
