The GS110TPP has an RGB LED used for system status indication. Expose all three components as separate GPIO LEDs connected via the device's RTL8231.
Signed-off-by: Sander Vanheule <[email protected]> --- .../dts-5.10/rtl8380_netgear_gs110tpp-v1.dts | 33 +++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/target/linux/realtek/dts-5.10/rtl8380_netgear_gs110tpp-v1.dts b/target/linux/realtek/dts-5.10/rtl8380_netgear_gs110tpp-v1.dts index 8382d35a9da1..1ff209cee363 100644 --- a/target/linux/realtek/dts-5.10/rtl8380_netgear_gs110tpp-v1.dts +++ b/target/linux/realtek/dts-5.10/rtl8380_netgear_gs110tpp-v1.dts @@ -1,10 +1,43 @@ // SPDX-License-Identifier: GPL-2.0-or-later #include "rtl8380_netgear_gigabit_1xx.dtsi" +#include <dt-bindings/leds/common.h> / { compatible = "netgear,gs110tpp-v1", "realtek,rtl838x-soc"; model = "Netgear GS110TPP v1"; + + aliases { + led-boot = &led_status_green; + led-failsafe = &led_status_red; + led-running = &led_status_green; + led-upgrade = &led_status_blue; + }; + + leds { + compatible = "gpio-leds"; + + led_status_red: led-0 { + label = "red:status"; + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; + }; + + led_status_green: led-1 { + label = "green:status"; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 32 GPIO_ACTIVE_LOW>; + }; + + led_status_blue: led-2 { + label = "blue:status"; + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 34 GPIO_ACTIVE_LOW>; + }; + }; }; &uart1 { -- 2.33.1 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
