Avoid flooding the log with the message below by increasing the log level to debug:
mt7621-nand 1e003000.nand: Using programmed access timing: 31c07388 Signed-off-by: Stijn Tintel <st...@linux-ipv6.be> --- target/linux/ramips/files/drivers/mtd/nand/raw/mt7621_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/linux/ramips/files/drivers/mtd/nand/raw/mt7621_nand.c b/target/linux/ramips/files/drivers/mtd/nand/raw/mt7621_nand.c index 825142e951..c829fc7170 100644 --- a/target/linux/ramips/files/drivers/mtd/nand/raw/mt7621_nand.c +++ b/target/linux/ramips/files/drivers/mtd/nand/raw/mt7621_nand.c @@ -759,7 +759,7 @@ static int mt7621_nfc_setup_interface(struct nand_chip *nand, int csline, acccon = ACCTIMING(tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt); - dev_info(nfc->dev, "Using programmed access timing: %08x\n", acccon); + dev_dbg(nfc->dev, "Using programmed access timing: %08x\n", acccon); nfi_write32(nfc, NFI_ACCCON, acccon); -- 2.34.1 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel