On Sat, Feb 5, 2022 at 10:12 AM Hauke Mehrtens <ha...@hauke-m.de> wrote: > > On 2/3/22 13:06, DENG Qingfang wrote: > > Hi, > > > > This series backports some patches from upstream to address the current > > MT7530 DSA driver's problems. > > > > Thanks. > > > > DENG Qingfang (6): > > kernel: backport MediaTek jumbo frame support > > kernel: backport MT7530 ageing time support > > kernel: backport MT7530 VLAN fix > > kernel: backport MT7530 MDB operations > > kernel: backport MediaTek Ethernet PHY driver > > kernel: backport MT7530 IRQ support > > > Hi, > > The last two patches are breaking the Linksys e8450 (mt7622) for me. > > I am getting these errors: Note the commentary in https://github.com/openwrt/openwrt/commit/3f4301e123f29348b4ad87578d62b7d1f5f210c6
The message in dmesg is harmless. It just says the functionality in this patch needs dts bindings, which were only provided for ramips. > ------------------------- > [ 1.243304] pci_bus 0001:00: bus scan returning with max=00 > [ 1.249219] mtk_hsdma 1b007000.dma-controller: Using 3 as missing > dma-requests property > [ 1.257493] mtk_hsdma 1b007000.dma-controller: MediaTek HSDMA driver > registered > [ 1.300554] mt7530 mdio-bus:00: no interrupt support > [ 1.312943] mt7530 mdio-bus:00 lan1 (uninitialized): failed to > connect to PHY: -EINVAL > [ 1.320890] mt7530 mdio-bus:00 lan1 (uninitialized): error -22 > setting up PHY for tree 0, switch 0, port 0 > [ 1.331163] mt7530 mdio-bus:00 lan2 (uninitialized): failed to > connect to PHY: -EINVAL > [ 1.339085] mt7530 mdio-bus:00 lan2 (uninitialized): error -22 > setting up PHY for tree 0, switch 0, port 1 > [ 1.349321] mt7530 mdio-bus:00 lan3 (uninitialized): failed to > connect to PHY: -EINVAL > [ 1.357241] mt7530 mdio-bus:00 lan3 (uninitialized): error -22 > setting up PHY for tree 0, switch 0, port 2 > [ 1.367452] mt7530 mdio-bus:00 lan4 (uninitialized): failed to > connect to PHY: -EINVAL > [ 1.375367] mt7530 mdio-bus:00 lan4 (uninitialized): error -22 > setting up PHY for tree 0, switch 0, port 3 > [ 1.385750] mt7530 mdio-bus:00 wan (uninitialized): failed to connect > to PHY: -EINVAL > [ 1.393575] mt7530 mdio-bus:00 wan (uninitialized): error -22 setting > up PHY for tree 0, switch 0, port 4 > [ 1.404399] mt7530 mdio-bus:00: configuring for fixed/2500base-x link > mode > [ 1.411452] DSA: tree 0 setup > [ 1.411640] mt7530 mdio-bus:00: Link is Up - 2.5Gbps/Full - flow > control rx/tx > ------------------------- > > I will revert both patches in master now. > > Hauke > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel