When driven by a GPIO pin, the system LED needs to be configured as
active high. Otherwise the LED switches off after booting and
initialisation.
Fixes: 47f5a0a3eed5 ("realtek: Add support for ZyXEL GS1900-48 Switch")
Signed-off-by: Sander Vanheule <[email protected]>
---
target/linux/realtek/dts-5.10/rtl8393_zyxel_gs1900-48.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/realtek/dts-5.10/rtl8393_zyxel_gs1900-48.dts
b/target/linux/realtek/dts-5.10/rtl8393_zyxel_gs1900-48.dts
index 9deecd636e31..8cc46635c424 100644
--- a/target/linux/realtek/dts-5.10/rtl8393_zyxel_gs1900-48.dts
+++ b/target/linux/realtek/dts-5.10/rtl8393_zyxel_gs1900-48.dts
@@ -28,7 +28,7 @@
led_sys: sys {
label = "green:sys";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
};
};
--
2.35.1
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
