Fix the BDF file to include the expected BMI IDs, so that the PCI Wi-Fi device
will work again after switching to pre-calibration.
Fixes: 80d34d9d593 ("ipq40xx: document pcie wifi chip on the GL.Inet GL-B2200")
CC: Christian Lamparter <[email protected]>
CC: Robert Marko <[email protected]>
Signed-off-by: Enrico Mioso <[email protected]>
---
.../ipq-wifi/board-glinet_gl-b2200.qca9888 | Bin 12200 -> 12164 bytes
1 file changed, 0 insertions(+), 0 deletions(-)
diff --git a/package/firmware/ipq-wifi/board-glinet_gl-b2200.qca9888
b/package/firmware/ipq-wifi/board-glinet_gl-b2200.qca9888
index
4f0a521f35935d4be1fb01b66dd9954a48eade52..f0a493ace340de0fe84d89d46cc07209df1b6883
100644
GIT binary patch
delta 79
zcmZ1x-x5DT!X-nW0SwH5WKwCdZ9#ITPEu~BZgNIufo^7stpS*ql%H6X0^%B)>69fF
YWhUm8*t+}ZIvE)m806+|Y|zjL0EmDWzyJUM
delta 115
zcmZpPUlBh+BBMv20Ssb*WKwCdZ9#ITPFZSRN`8^8p_xUpPD*N7W^$^nfq|)+PH|~c
qab<ByYOXF+g#i#CiNe(aMavS4G86MkY~6iyos5hO3^vAS=mP*4B_x6X
--
2.36.0
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
