On Wed, 27 Apr 2022 at 19:31, Enrico Mioso <mrkiko...@gmail.com> wrote: > > When the GL-B200's PCI device was switched to pre-calibration, the ath1'k > wasn't able to find the pre-calibration data. This is not really correct, ath10k was unable to find the BDF in the served board-2.bin
For future reference, post the relevant driver log before and after, it shows the issue really clearly. Regards, Robert > Infact, the BDF files was missing the correct BMI IDs for this device, > resulting in a failure to start it. > Repackage the BDF file after renaming relevant fields and files correctly, > allowing thePCIE Wi-Fi to continue working. > > Fixes: 80d34d9d593 ("ipq40xx: document pcie wifi chip on the GL.Inet > GL-B2200") > CC: Christian Lamparter <chunk...@gmail.com> > CC: Robert Marko <robima...@gmail.com> > Signed-off-by: Enrico Mioso <mrkiko...@gmail.com> > --- > .../ipq-wifi/board-glinet_gl-b2200.qca9888 | Bin 12200 -> 12164 bytes > 1 file changed, 0 insertions(+), 0 deletions(-) > > diff --git a/package/firmware/ipq-wifi/board-glinet_gl-b2200.qca9888 > b/package/firmware/ipq-wifi/board-glinet_gl-b2200.qca9888 > index > 4f0a521f35935d4be1fb01b66dd9954a48eade52..f0a493ace340de0fe84d89d46cc07209df1b6883 > 100644 > GIT binary patch > delta 79 > zcmZ1x-x5DT!X-nW0SwH5WKwCdZ9#ITPEu~BZgNIufo^7stpS*ql%H6X0^%B)>69fF > YWhUm8*t+}ZIvE)m806+|Y|zjL0EmDWzyJUM > > delta 115 > zcmZpPUlBh+BBMv20Ssb*WKwCdZ9#ITPFZSRN`8^8p_xUpPD*N7W^$^nfq|)+PH|~c > qab<ByYOXF+g#i#CiNe(aMavS4G86MkY~6iyos5hO3^vAS=mP*4B_x6X > > -- > 2.36.0 > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel