Disabling the sys-led peripheral should be done via a pin controller, for which pinctrl-single nodes are present in the platform DTSI files. Drop the hardcoded per-platform sys-led configurations, and require things to be set up in the devicetree.
Co-developed-by: INAGAKI Hiroshi <[email protected]> Signed-off-by: INAGAKI Hiroshi <[email protected]> Signed-off-by: Sander Vanheule <[email protected]> Tested-by: Bjørn Mork <[email protected]> --- .../files-5.10/arch/mips/rtl838x/setup.c | 40 ------------------- 1 file changed, 40 deletions(-) diff --git a/target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c b/target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c index 55419c7b0b7a..df29b76bbf0f 100644 --- a/target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c +++ b/target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c @@ -28,31 +28,6 @@ extern struct rtl83xx_soc_info soc_info; -static void __init rtl838x_setup(void) -{ - /* Setup System LED. Bit 15 then allows to toggle it */ - sw_w32_mask(0, 3 << 16, RTL838X_LED_GLB_CTRL); -} - -static void __init rtl839x_setup(void) -{ - /* Setup System LED. Bit 14 of RTL839X_LED_GLB_CTRL then allows to toggle it */ - sw_w32_mask(0, 3 << 15, RTL839X_LED_GLB_CTRL); -} - -static void __init rtl930x_setup(void) -{ - if (soc_info.id == 0x9302) - sw_w32_mask(0, 3 << 13, RTL9302_LED_GLB_CTRL); - else - sw_w32_mask(0, 3 << 13, RTL930X_LED_GLB_CTRL); -} - -static void __init rtl931x_setup(void) -{ - sw_w32_mask(0, 3 << 12, RTL931X_LED_GLB_CTRL); -} - void __init plat_mem_setup(void) { void *dtb; @@ -71,21 +46,6 @@ void __init plat_mem_setup(void) * parsed resulting in our memory appearing */ __dt_setup_arch(dtb); - - switch (soc_info.family) { - case RTL8380_FAMILY_ID: - rtl838x_setup(); - break; - case RTL8390_FAMILY_ID: - rtl839x_setup(); - break; - case RTL9300_FAMILY_ID: - rtl930x_setup(); - break; - case RTL9310_FAMILY_ID: - rtl931x_setup(); - break; - } } void __init plat_time_init(void) -- 2.36.1 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
