Add the missing LEDs for GB-PC2. Some of these LEDs don't exist on the device schematics. Tests on a GB-PC2 by me and Petr proved otherwise.
Remove ethblack-green and ethblue-green LEDs for GB-PC1. They are wired to the switch pins and have their own function for link state and activity. Set ethyellow-orange to display link state and activity of the ethyellow interface for GB-PC2. Link: https://github.com/ngiger/GnuBee_Docs/blob/master/GB-PCx/Documents/GB-PC2_V1.1_schematic.pdf Tested-by: Petr Louda <petr.lo...@outlook.cz> Signed-off-by: Arınç ÜNAL <arinc.u...@arinc9.com> --- .../linux/ramips/dts/mt7621_gnubee_gb-pc1.dts | 10 ---------- .../linux/ramips/dts/mt7621_gnubee_gb-pc2.dts | 18 ++++++++++++++---- .../mt7621/base-files/etc/board.d/01_leds | 4 +--- 3 files changed, 15 insertions(+), 17 deletions(-) diff --git a/target/linux/ramips/dts/mt7621_gnubee_gb-pc1.dts b/target/linux/ramips/dts/mt7621_gnubee_gb-pc1.dts index 29f9f09ee5..809df6dde3 100644 --- a/target/linux/ramips/dts/mt7621_gnubee_gb-pc1.dts +++ b/target/linux/ramips/dts/mt7621_gnubee_gb-pc1.dts @@ -27,16 +27,6 @@ leds { compatible = "gpio-leds"; - ethblack_act { - label = "green:ethblack_act"; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; - }; - - ethblue_act { - label = "green:ethblue_act"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - }; - power { label = "green:power"; gpios = <&gpio 6 GPIO_ACTIVE_LOW>; diff --git a/target/linux/ramips/dts/mt7621_gnubee_gb-pc2.dts b/target/linux/ramips/dts/mt7621_gnubee_gb-pc2.dts index cd72ea1d62..6199511cff 100644 --- a/target/linux/ramips/dts/mt7621_gnubee_gb-pc2.dts +++ b/target/linux/ramips/dts/mt7621_gnubee_gb-pc2.dts @@ -27,16 +27,26 @@ leds { compatible = "gpio-leds"; - ethblack_act { - label = "green:ethblack_act"; + ethblack-green { + label = "green:ethblack"; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; }; - ethblue_act { - label = "green:ethblue_act"; + ethblue-green { + label = "green:ethblue"; gpios = <&gpio 4 GPIO_ACTIVE_LOW>; }; + ethyellow-green { + label = "green:ethyellow"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + ethyellow-orange { + label = "orange:ethyellow"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + power { label = "green:power"; gpios = <&gpio 6 GPIO_ACTIVE_LOW>; diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index 0ac67e9670..5ffa4ecb3a 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -67,10 +67,8 @@ dlink,dir-882-a1|\ dlink,dir-882-r1) ucidef_set_led_netdev "wan" "wan" "green:net" "wan" ;; -gnubee,gb-pc1|\ gnubee,gb-pc2) - ucidef_set_led_netdev "ethblack_act" "ethblack act" "green:ethblack_act" "ethblack" "tx rx" - ucidef_set_led_netdev "ethblue_act" "ethblue act" "green:ethblue_act" "ethblue" "tx rx" + ucidef_set_led_netdev "ethyellow" "ethyellow" "orange:ethyellow" "ethyellow" "link tx rx" ;; linksys,e5600) ucidef_set_led_netdev "wan" "wan link" "blue:wan" "wan" "link" -- 2.34.1 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
